Table of Contents
Advertisement
3
Lightly press and move the toothbrush
against your teeth�
► Example brushing sequence
Divide your teeth into 4 parts
(upper and lower, left and right),
and brush one part in order
such as "1 front of the teeth",
"2 biting plane of the teeth",
and "3 back of the teeth"
spending 30 seconds.
Repeat this same procedure for
the other 3 areas.
• By brushing the above 4 parts
for 30 seconds each (about
2 minutes), you can evenly
brush your teeth without missing
any spots in your mouth.
• See page 8 about "30-second brushing notification
timer function."
4
Turn off the main unit before removing it from
your mouth to prevent saliva from spattering�
• Press the switch after at least 5 seconds of
operation in one mode to turn the toothbrush off. If
you press the switch before 5 seconds of operation
have elapsed, the mode changes. (See page 10.)
EW-DL34_ASIA.indb
11
Notes
• Do not put the main unit in contact with hair products,
hand creams, etc.
Doing so may damage the exterior.
• The appliance may not operate in an ambient
temperature approximately 5 °C or lower.
• Use SOFT mode if it feels too strong in NORMAL mode.
• When first using this appliance, some people may
experience a tickling or tingling sensation caused by
the sonic vibrations.
The sensation should subside after you use the
toothbrush several more times.
• If you push the brush head too hard, the sound may
change, but this is not an abnormality.
11
2018/12/27
9:09:32
Advertisement
Chapters
Table of Contents
