Philips PR0930X Owner's Manual page 2

PR0930x4 3/1/02 10:21 AM Page 2
H
OOKING
A
NTENNA
C UHF/VHF
OMBINATION antenna (supplied), push the
base of the antenna into the
A combination antenna or a
antenna hole on either the left
rod antenna (supplied)
or the bottom of the TV.
receives normal broadcast
If your antenna has a
channels (VHF 2-13 and UHF
round connector (75Ω),
14-69). Your connection is easy
then you're ready to connect it
since there is only one 75Ω
to the TV. Go to step 2.
(ohm) antenna jack on the
If your antenna has flat
back of your TV - and that's
twin-lead wire (300Ω), you
where the antenna goes.
first need to attach the antenna
wires to the screws on a 300
to 75Ω adapter (not supplied).
Combination
VHF/UHF Antenna
(outdoor or indoor)
S UHF/VHF
EPARATE
Y ou may have two separate
UHF and VHF antennas to
antennas. One antenna is
the correct screws on the
for VHF channels (2-13) and
combiner (not supplied).
the other antenna is for UHF
channels (14-69).
For homes with separate
UHF/VHF antennas, you will
need an optional combiner
before you can connect the
antennas to the TV.
Outdoor UHF Antenna
(Twin-lead 300Ω)
Outdoor VHF
Antenna
(Twin-lead 300Ω)
OR
Outdoor VHF
Antenna
(Round cable 75Ω)
All manuals and user guides at all-guides.com
U Y TV (A
P OUR NTENNA
If you install a rod
Push the round end of
the adapter (cable or rod
antenna) onto the
ANT(enna) IN jack on the
back of the TV. If the round
end of the adapter or cable is
threaded, screw it down tight.
Rod Antenna
(supplied)
Round cable of
Rod Antenna
to ANT. IN
OR
300 to 75Ω adapter
to ANT. IN
Twin-lead wire
OR Round Cable
75Ω to ANT. IN
Attach the separate
Push the round end of the
combiner onto the ANT(enna)
IN jack on the back of the TV.
UHF/VHF Combiner
(not supplied)
Twin-lead
Wire
U H
F
3 0 0
Ω
V H F
75-300Ω Adapter
- 2 -
/C C
ABLE ONNECTIONS
If you installed a rod
antenna, extend the antenna
and adjust its length, direction,
and angle for the clearest pic-
ture.
To either
Antenna Hole
ANT. IN
AC 120V
Back of TV
Round
End
ANT. IN
AC 120V
Back of TV
)
S
MART
H
ELP
To set the
TV to select only
the channel num-
bers in your area,
see Auto Install on
page 5.
If you install the TV
beneath a kitchen
cabinet, you may
push a rod antenna
into the antenna
hole on the bottom
of the TV cabinet
for the best use. See
page four for details
on how to install
the TV under a
kitchen cabinet.