System Menu - Sony SRG-300SEC User Manual

Setting the range of the RIGHT/LEFT movement
(Eflip: OFF)
CENTER (0°)
–
170°
Setting the range of the UP/DOWN movement
(Eflip: OFF)
+90°
0°
–
20°
Note
When you turn the camera to the right or left beyond the
100° with the camera pointed downward by 20°, the
camera may be caught on the lens, depending on the
zoom position of the lens.
PAN/TILT SLOW (low Pan-Tilt mode)
When this function is set to ON, the active speed of
PAN/TILT will be slow and it is easy to shoot slow-
moving objects.
D-ZOOM (digital zoom)
You can set digital zoom to ON or OFF. When set to
OFF, digital zoom does not operate, and only optical
zoom is available. When set to ON, digital zoom takes
over after optical zoom reaches MAX. Up to maximum
360×* can be zoomed digitally.
* SRG-201SE is up to 240× zoomed digitally.
+170°
(Eflip: ON)
+20°
0°
–90°

SYSTEM Menu

DISPLAY INFO
When this item is set to ON, the message automatically
appears for about 3 seconds on the external monitor
screen that is connected to the SDI OUT connecter when
you perform the following operations using the remote
controller.
Message Operation using the remote
controller
PRESET n OK You have stored the camera
"n" is a preset position settings to POSITION 1 to 16.
number.
RECALL n OK You have read the camera settings
"n" is a preset position stored in POSITION 1 to 16.
number.
RESET n OK You have reset the camera
"n" is a preset position settings stored in POSITION 1 to
number. 16.
ONE PUSH WB:OP During the white balance
adjustment in the ONE PUSH
white balance mode, the message
flashes on the screen.
ONE PUSH WB:OK When white balance adjustment
is correctly performed in ONE
PUSH white balance mode, this
message appears on the screen.
ONE PUSH WB:NG If white balance adjustment is
incorrectly performed in ONE
PUSH white balance mode, this
message flashes on the screen.
Note
These messages are not displayed for the operation via a
network.
57
SYSTEM Menu