Hitachi L442 Instruction Manual page 3

Introduction
This is the instruction manual for L442 probe. The probe is available by connecting to Hitachi's ultrasound diagnostic
instrument and can be mainly used for observation of superficial organs.
Prior to use, read this manual as well as the separate instruction manual "Safety" in which information for safe use is
provided.
The probe bears the CE mark but the mark is valid only when the probe is connected to the ultrasound diagnostic
instrument bearing the CE mark.
Symbols used in this document
Safety information is classified into Danger, Warning, and Caution according to the level of hazard. Those terms are
used in safety information provided to prevent hazards and injuries to the operator or patient.
Danger
Warning
Caution
Note
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury to the operator or patient.
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury to the operator or patient.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury to the operator or patient, or property damage only.
Indicates a strong request concerning an item that must be observed in order to prevent
damage or deterioration of the equipment and also to ensure that it is used efficiently.
This symbol means that the described action is prohibited.
This symbol means that the described action is mandatory.
iii
MN1-6423 Rev. 0