Advertisement
3. Description
① LED Indicator
⁻ Power ON mode: BLUE
⁻ Power OFF(Standby) mode: RED
• Be sure to point the remote control at the remote control sensor on the LED/LCD
Display.
② USB for OPS and external devices.
③ Touch USB : USB Port is available when External Source is selected.
④ HDMI Input (When connected, it changes to External Source.)
Important Notice
◆ The USB cable (3m) that Hitachi provides in this accessory box is for the Touch USB at
the back. Therefore, in case of connecting USB cable to Touch USB port in front,
separate USB cable is required and the length of cable is strongly recommended to be
less than 3m to make sure the signal intensity of touch sensor works properly.
①
② ③ ④
7
Advertisement
