Download Print this page

Sanyo SK-ST2 Instruction Manual page 3

Stainless steel toaster

Advertisement

FOR ELECTRICAL SAFETY
• This appliance must be earthed.
• This appliance must be connected to a 220-240V – 50Hz mains
supply.
• No toaster should be left unattended when in use.
• An appliance dropped or damaged should not be used until
examined by a service engineer.
• Do not permit power cord to come in contact with hot objects. A
damaged supply cord must be replaced by the manufacturer, its
service agent or a similarly qualified person in order to avoid a
hazard.
• Do not attempt to service this appliance yourself. Refer to
qualified service personnel.
FEATURES
800 – 950 Watts
6 toast settings
High lift function
Reheat function
Cancel function
Removable crumb tray
OPERATING INSTRUCTIONS
• After unpacking the toaster, remove any plastic bags, sticker or
packing that may present a hazard to young children and
destroy. Wipe the exterior of the toaster with a soft damp cloth or
towel and dry with a dry towel. Do not immerse the toaster in any
liquid.
• Place the toaster on a firm, horizontal surface and keep away
from other heat sources.
• Check that the loading handle is in the raised position, and the
browning control set to approximately half way before
connecting to the mains supply.
• Place bread in the bread slots, select the desired browning
setting level, and press the handle right down until it latches. The
bread will be lowered into the toaster and toasting will begin.

Advertisement

loading