A2 stereo, nicam stereo, active 3d surround sound system, teletext (flof) (44 pages)
Summary of Contents for Sanyo CP29FS1
Page 1
CP29FS1 INSTRUCTION MANUAL CA29FS1 CP29YS2 Colour Television CA29YS2 Flat Screen Multi System CATV Hyper Band 256 Programmes with Automatic Tuning AV Stereo Sound System...
Warnings and Cautions Caution Warning At instalation of the unit, the plug of power cord High voltages are used in the operation of this shall remain accessible and readily operable to television receiver. Do not remove the cabinet disconnect the unit from the wall outlet. back from your set.
Plug & Play Contents Multi Personal Preference Level Warnings and Cautions ....2 Contents ......3 Note: Model CA29FS1 is not equipped with Multi Plug &...
Each button listed in this section has the same function as it’s Front Controls corresponding button on the remote control. Model CP29FS1, CA29FS1 Mains ON/OFF Button Press to open Stand-by and Power Indicator PO WE R Headphone Jack Remote Control Detector...
General Operation Auto shut Off Function RECALL This TV set incorporates the AUTO SHUT OFF To display the on screen indications, press function. Even if the TV is left on after you have the RECALL/COLOUR SYSTEM button. gone to sleep, the TV set changes to the standby -/- - mode within 10 minutes after all broadcasts have Programme...
General Operation OFF TIMER Press the VOLUME ( + or - ) button. The set The OFF TIMER will switch off the TV automatical- time will be increased or decreased by 10 ly after 30 minutes, 1 hour, 1 hour and 30 minutes, minutes each time the button is pressed ;...
Colour and Sound System Broadcast Transmission System List 1) Select “SIF” with the Progamme UP or DOWN button in the Semi-auto or Manual Tuning Colour Sound mode.Then press the VOLUME ( + or - ) Country Area System System button to select a optimum sound system. Union of Arab Emirates, Middle (Semi-Auto or Manual Tuning mode )
Picture Adjustment Basic Picture Adjustment Operation return Main menu, press Press the MENU button for MAIN menu ALTERNATE button. display. To return to the normal TV mode, press the MENU button. ( Or will automatically return to PICTURE the normal TV mode after 20 seconds.) AUDIO PRESET Select desired control by pressing...
Tuning of the Channels Up to 256 broadcast stations in your reception Semi-Auto Tuning and Manual Tuning area can be stored in the electronic memory. Press the MENU button for MAIN menu There are three ways of tuning as follows; display.
Tuning of the Channels Channel Copy Press the DIGIT button, “ 1 “ button and then “ 2 ” button on the remote control to enter This function can be utilized after Automatic programme number 12. (For example, to Tuning. enter programme number “...
Tuning of the Channels Select “SKIP” by pressing the Progamme Select “MEMORY” pressing UP or DOWN button,then press the Progamme UP or DOWN button, then press the VOLUME + or - button for memory. VOLUME + or - button to set SKIP to ON. To cancel Skip Channel function, set to OFF MODE SEMI...
Setting of the OSD (On Screen Display) Language Press the MENU button for MAIN menu dis ENGLISH play. VIETNAMESE P CC PICTURE FRANCAIS AUDIO BAHASA INDONESIA PRESET LANGUAGE Select “ENGLISH”, “ ”, “VIETNAMESE”, Select “LANGUAGE “ by pressing the “ ”, “FRANÇAIS”, “BAHASA INDONE- Programme UP or DOWN button.
AUTO Colour system setting for AV position is automatically stored in the memory. S-VHS VCR / DVD Player Connection (For Model CP29FS1/CA29FS1) To display high grade picture S-VHS video, connect to S-VIDEO terminal. Using the S-VIDEO terminal to connect to a DVD player instead of the normal video input terminal pro vides a clearer video image.
Connecting other Equipment Connecting to a DVD Player with AV1(DVD) Video Component Input Terminal (Y, Cb or Cr) Connect the component output terminal on your DVD player to the component video input terminal of this product. (NOTE: When a signal of Y,C /Y,P is received, the output signal from monitor output terminal will be corresponding but without colour (black and white image).)
Connecting other Equipment Connecting to the Monitor Output Jacks The picture signal being displayed on the TV screen is output through the Monitor Output Jacks. Use these terminals to record TV broadcasts and for video dubbing from AV1 or AV2 input terminals. INPUT MONITOR OUT Recording TV broadcasts or tape dubbing...
Aerial Connection Connecting Outdoor Aerial Connect the cable with a plug from a UHF (or VHF) aerial to the aerial socket on the cabinet back. Outdoor Aerial Aerial Cable Aerial Socket For all aerial circuit problems please consult your local dealer. Care and Cleaning The surface of the cabinet can be damaged if not properly maintained.
Video monitor outputs: Phone Jack x 1 (1.0Vp-p, impedance 75 Ω) Audio monitor outputs: Phone Jack (L/R) x 1 (436mVrms, impedance less than 600Ω) Headphone Jack (Mini Stereo Jack) x 1 (Model CA29FS1, CP29FS1 only) Dimension Model CP29FS1, CA29FS1: 803 (W) x 578 (H) x 418 (D)mm...
Helpful Hints - Problems/Solutions Before requesting service check the following chart. Problem: Check these Conditions / Try these solutions: No picture, Check if TV is plugged in. Try a different channel, if OK, probably station trouble. no sound Adjust Brightness or Contrast control. Poor picture, Adjust Fine Tuning.
Page 20
Part No. 1AA6P1P5399-A BA6V-A (FC6-B) SANYO ELECTRIC Co., Ltd.