Table of Contents
Advertisement
CONNECTION
REMOTE CONTROLLER CIRCUIT CONNECTIONS
Use the layout below to make a remote controller and make the connections to the remote input pins (R1, R2) of the
CONTROL terminal as indicated. This will permit remote controlled operation of this unit.
CONTROL
G C R1 R2 C S C A C 1 2 3 4 C
RS232C
INSTALLING THE RACK MOUNTING BRACKETS (SOLD SEPARATELY)
To mount this unit onto a rack, please use the rack mount hardware (model VA-RACMK 1) sold separately.
1
Insert the head of two of the supplied bolts into the
keyhole opening on the side of the unit.
Insert the head of the bolt in the larger side, then slide it to
the smaller side of the opening.
2
Align the slot on the mounting bracket with the two
bolts.
Make sure the bolts have not moved from their position,
then place a flat washer, a locking washer, and fix with a
nut.
NOTE:
Make sure to use the bolts provided with this unit, as the
bolts provided with the rack mount hardware are too short.
3
Install the second mounting bracket on the opposite
side, then attach the unit onto the rack using the rack
mount bolts.
220Ω
SW 5
220Ω
SW 6
300Ω
SW 7
360Ω
SW 8
470Ω
SW 9
680Ω
SW 10
820Ω
SW 11
1.2kΩ
SW 12
SW: switch
1
2
3
6
: Menu selection
: VCR playback
: Live picture
: 4 divisions split
screen
: Monitor 2
: Camera sequential
display
: Zoom
: Still image
220Ω
SW 1: Camera 1
220Ω
SW 2: Camera 2
300Ω
SW 3: Camera 3
360Ω
SW 4: Camera 4
English
Advertisement
Table of Contents
