Radio Operation - Sanyo FXD-785GD Operating Instructions Manual

RADIO OPERATION

1
REL
ATP
SELECTING RADIO MODE ........................................1
Press the BAND ATP button 1 to switch from CD mode to the radio mode.
Each time the BAND ATP button 1 is pressed, the selected band changes as shown below.
FM I ➔ FM II ➔ FM III ➔ AM I ➔ AM II
RADIO TUNING .................................................................................. 2
• Automatic tuning
Press the TUN/TRK
When the button is pressed, the system will start automatic tuning and stop at the next receivable
station.
• Manual tuning
To select higher frequency station, press the TUN/TRK
The " MANU " indicator appears in the display window.
To select lower frequency stations, press the TUN/TRK
To quickly scan up or down in frequency, press and hold the TUN/TRK
button when the display approaches the desired frequency, then press and release the button re-
peatedly until the desired frequency is displayed.
After 4 seconds of completing Manual Tuning, the tuning control will revert to the Automatic Tuning
mode.
STORING PRESET STATIONS .......................................................... 3
The preset buttons 3 can be used to store 6 stations in each band (FM 1, FM 2, FM 3 and AM 1, AM 2)
for convenient access to your favorite stations.
• Programming stations
1.
Select the desired band, then tune in the station you want to store in memory.
2.
Press and hold one of the preset buttons 3 for more than 2 seconds until the frequency indicator
flashes twice. Repeat steps 1. and 2. to program additional stations.
• Quick tuning
Select the desired band, then press one of the 6 preset buttons 3.
4
FM /AM CD RECEIVER
LO/DX
1 2
LOUD
or Button 2.
FXD-785GD 50W x 4
SHF RPT
3 4 5 6
3
button 2 for more than 0.5 seconds.
button 2 for more than 0.5 seconds.
GB–9
VOL
TUN TUN
TRK TRK
MUTE
AUDIO POWER
2
or button 2. Release the