Canon HR10 Instruction Manual page 105

....
There is no sound from the TV, When connecting the camcorder to an HDTV using the CTC-lOO/S 93
Component Cable, make sure to connect also the audio connections using
the white and red plugs of the STV-IO0 Stereo Video Cable.
Disconnect the HDMI cable and then restore the connection or turn the
camcorder off and then on again.
The camcorder is connected using
the HDMI cable, but there is no
picture or sound from the HDTV,
The disc cannot be recognized by the
device, Or, even though the disc is
read, cannot play backthe disc orthe
picture is distorted.
The disc is dirty, Clean the disc with a soft lens-cleaning cloth.
Finalize the disc,
DVD-RW discs recorded in SD quality (VRmode) can only be played back
with VR mode-compatible DVD players. Refer to the instruction manual of
our DVD device,
Discs recorded in HD quality can only be played back with AVCHD-
compatible DVD players, Refer to the instruction manual of your DVD
device,
Cannot edit my recordings or add It may not be possible to edit or add recordings with an external DVD
recordings to the disc with the DVD recorder on a disc recorded with this camcorder,
device.
When writing on a disc in this The camcorder has exceeded its operational temperature, Turn off the
camcorder recordings transferred camcorder and let it cool down before resuming use.
from a computer, an error message
appears,
111
68
Memory Card Operation
Memory card cannot be inserted. Memory card was not facing the correct direction. Turn the memory card
over and insert it.
Cannot record on the memory card. Memory card is full. Erase still images to free some space or replace the
memory card.
Memory card was not initialized. Initialize the memory card.
The folder and file numbers have reached their maximum value. Set
[FILE NOS.] to [RESET] and insert a new memory card.
Still images cannot be captured from the playback scene when [IV TYPE]
is set to [NORMAL TV].
Memory card cannot be played back, Insert a memory card,
Set the camcorder to {P mode,
Image cannot be erased, Image is protected, Cancel the protection,
[_ appears in red. A memory card error occurred, Turn off the camcorder, Remove and
reinsert the memory card and set the camcorder back to (_ _t
mode, If @ still appears in red, initialize the memory card,
iiiiili: i ii iiiil
34
77
84
53
53
34
75
83
84
105