LG LSGL6337F Service Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Ranges
  5. LSGL6337F
  6. Service manual

LG LSGL6337F Service Manual

30" slide-in gas range
Hide thumbs Also See for LSGL6337F:
Table of Contents

Advertisement

Quick Links

Confidential
30" Slide-In Gas Range
SERVICE MANUAL
CAUTION
BEFORE SERVICING THE UNIT, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
MODEL: LSGL6337F, LSGL6337D
Any reproduction, duplication, distribution (including by way of email, facsimile or other electronic means), publication,
modification, copying or transmission of this Service Manual is STRICTLY PROHIBITED unless you have obtained the
prior written consent of the LG Electronics entity from which you received this Service Manual.
The material covered by this prohibition includes, without limitation, any text, graphics or logos in this Service Manual.
Copyright © 2021 LG Electronics Inc. All rights reserved. Only training and service purposes
MFL69401912_Rev00. 01082021

Advertisement

Table of Contents
loading

Related Manuals for LG LSGL6337F

Summary of Contents for LG LSGL6337F

  • Page 1 Service Manual is STRICTLY PROHIBITED unless you have obtained the prior written consent of the LG Electronics entity from which you received this Service Manual. The material covered by this prohibition includes, without limitation, any text, graphics or logos in this Service Manual.
  • Page 2 • Repairs of the appliance should be carried out by a licensed technician only. Incorrect repairs may result in dangerous situations. If you need repairs, contact an LG Service Center or your dealer. • If the power cord is defective, it must be replaced by a qualified service agent with a UL listed range cord.

  • Page 3: Table Of Contents

    • Removing A InstaView PCB - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-23 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 4 EXPLODED VIEW - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12-1 ~ 12-6 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 5: General

    • Be careful when removing and lifting the door. • DO NOT lift the door by the handle. - Failure to do so can result in personal injury as the door is very heavy. Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 6 Other surfaces of the appliance may become hot enough to cause burns among these surfaces are oven vent openings and surfaces near these openings, oven doors, and windows of oven doors. Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 7 • Do Not allow aluminum foil or meat probe to contact heating elements. DEEP FAT FRYERS: • Use extreme caution when moving the grease kettle or disposing of hot grease. Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 8: Model & Serial Number Label And Tech Sheet Locations

    MODEL & SERIAL NUMBER LABEL AND TECH SHEET LOCATIONS The Model/Serial Number label and Tech Sheet locations are shown below. Model & Serial Number Location Tech Sheet Location Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 9: Specifications

    Exterior - Width Exterior - Height 36 (cooktop) Exterior - Depth (without handle), 29 (with handle) Power Net weight: lbs (kg) 160.2 lb (72.7 kg) Rating 120V 4.2A Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 10: Using Your Range

    Preheating is not required when using broil. All foods should be turned at least once except fish, which does not need to be turned. Broil burner Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 11: Control Panel Features

    Timer On/Off / Wi-Fi Press the button to set or cancel timer on oven. Press and hold button for three seconds to connect the appliance to a Wi-Fi network. Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 12: To Turn On On The Surface Burners

    3. Press Start to accept the change. 3. START, CLEAR/OFF 1. Touch START key to start oven. 2. Turn the Oven mode knob to cancel a program during cooking or Erase during programming. Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 13: Preheating Alarm Light On/Off

    START : 2 → Low : 3 → 5-hour 16. AUTO CONVERSION Press Settings repeatedly until Press 1 Auto appears in the display. Auto conversion START On/off Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 14: Component Access

    Burner Body Micro Switch Pipe Igniter (broil) Spark module Door switch Broil burner Oven sensor Oven Light Oven valve Conv. Motor Gas pressure regulator Igniter (bake) Bake burner Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 15: Removing The Back Cover

    2. Pull the range away from the wall so that you can access the rear panel. 3. To remove the back cover, remove 15 screw from the cover. Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 16: Removing The Oven Relay & Power Pcb

    2. Pull the range away from the wall so that you can Screw access the rear panel. 3. Remove the back cover (See step 3 on page 3-2) Oven Relay & Power PCB Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 17: Removiing The Cooktop Plate And The Spark Module

    4. Remove the 15 screws from the cooktop plate. NOTE : Before lowering the top onto the front clips, line up the burner body and with the cooktop. Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 18: Removing The Controller Panel And Main Pcb

    3-4 Page) 3. To disassemble controller panel, remove 6 screws and take out the hook hanging from the side panel. 6. Disconnect key pad wiring. Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 19: Removing The Knob Lighting Pcb

    1. Turn off the electrical supply and gas supply going to the range. 2. Release the knobs and Loosen 2 kinds of screws. 3. Remove the Knob ring. Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 20: Removing The Cooktop Parts

    1. Turn off the electrical supply and gas supply going to the range. Ignition 2. Remove the cooktop plate (See “REMOVING switch THE COOKTOP PLATE” on page 3-4). Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 21 COMPONENT ACCESS 5. To remove the electrode (spark plug): a) Remove the electrode from the burner housing. Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 22: Removing The Door Switch

    3. Remove the controller panel (see "Removing the controller panel" Page 3-5). 4. Remove the back cover (see "Removing the back cover" Page 3-2) and 2 more screws to remove side panel. Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 23: Removing The Broil Burner Assembly

    3. To remove the broil Burner assembly: igniter. a) Remove the back cover (see "Removing the Back Cover" Page 3-2). b) Remove the igniter connector from the behind. 2 screws 3-10 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 24: Removing The Convection Burner Assembly

    Page 3-2). 3. Remove the igniter connector and 1 screw from air shutter. 7. Remove 3 screws to disassemble convection burner and igniter. 4. Remove the door. 3-11 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 25: Removing The Convection Fan Blade And Fan Motor

    Remove the back cover (see “Removing the Back Cover” Page 3-2). b) Remove connector and 3 screws. < Stabilizer> 5. To remove the fan blade, remove the nut by screwing clockwise. 3-12 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 26: Removing The Oven Light & Socket Assembly

    3. Pull the bulb out of the socket. Glass cover & Bulb Inner Ring 6. Disconnect the wires from the socket terminals. Glass cover & Bulb Outer Ring <Viewed From Rear Panel> 3-13 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 27: Removing The Latch Drive Assembly

    The motor operates to Socket Clips MICRO SWITCH unlock door at that time. 1 Screw Latch driver motor 6. Unhook the Latch rod from the cam. 3-14 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 28: Removing The Oven Temperature Sensor

    Remove 1 screw in the oven cavity. b) Remove the back cover (see “Removing the Back Cover” Page 3-2). c) Disconnect the wire connection. d) Remove the oven sensor. 3-15 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 29 2. Locate the glide lever on each side of the drawer. Push down on the left glide lever and pull up on the right glide lever. 3. Pull the drawer away from the range. 3-16 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 30 5. Lift door up and out until the hinge arm is clear of lock 5. Close the oven door. the slot. Hinge arm Hinge arm Bottom Bottom edge of edge of slot slot Indentation Indentation 3-17 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 31 7. To remove the door handle & trim - Remove the 2 door handle screws and lift the door handle off door trim and slide up the door trim. 3-18 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 32 Lift the hinge hanger out of the door liner slot. Inner oven door Glass & Bracket 4 top liner Screws Insulation Insulation Hinge Door frame 3-19 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 33 1. Open the oven door to its fully down position. 2. Pull the oven door gasket clips out of the liner holes until all of the clips are removed. 3-20 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 34 Page 3-2). 5. Raise the cooktop plate (see "Removing the cooktop plate" Page 3-4). 6. Remove the controller panel (see "Removing the controller panel" Page 3-5). 3-21 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 35 Remove the 3 fittings. b) Remove the 3 connectors. c) Remove the 2 screws and than lift the oven valve. 3 Connectors 2 Screws 3 Fittings 3-22 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 36 Controller Panel" Page 3-5). 7. Remove the side panel (see "Removing the Side Panel" Page 3-20). 8. Remove the 1 screw on the drawer panel front. 3-23 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 37: Component Test

    1+2 = 25.2 Ω ± 10% 2. Measure the resistance 1+3 = 30.5 Ω ± 10% (Multiple meter scale: R x 1) Abnormal: Infinite (open) below 5Ω (shorted) Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 38: Door Lock Motor

    (Multiple meter scale: R x 1000) NOTE: Ω Value was tested at room temperature (77F/25˚C) NOTE: Oven sensor is so sensitive to temperature Do test after cooling down sufficiently Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 39: Door Switch (Normally Closed Type)

    1. Refer to page 3-10 ~ 3-11 for servicing Normal: 45 Ω ~ 400 Ω procedure. (Room Temperature Resistance) 2. Measure the resistance after cooling down. (Multiple meter scale : R x 1) Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 40: Safety Valve

    40° ~ 80° procedure. 2. Measure the resistance by rotating the cam of each switch slowly. (Multiple meter scale : R x 1) 40˚ Continuity Infinite 80˚ Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 41: Conversion To Lp Gas

    Top burner and Broil converted appliance is checked as specified in the burner orifices Bake burner orifice manufacturer’s instructions supplied with the kit. Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 42 - LSGL6337F : 6ea [LSGL6335F] - LSGL6335F : 5ea 0.83 0.62 Installation Guide (1ea) 0.95 3. Convert regulator 1.08 WARNING 1.04 Do not remove the pressure regulator from the range. Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 43 ⑤ ④ holder. AIR SHUTTER To prevent leakage, make sure the orifice spud is securely screwed into the nozzle holder. Rotate the orifice spud counterclockwise to remove. Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 44 2) Remove the nozzle cover on the Dual burner The appropriate burner will ignite so the flames body. (Applied model : LSGL6337F) can be check through the oven window. 3) Remove the brass orifice spud in the chimney –...
  • Page 45 With LP gas, some yellow tipping on the Follow conversion process with original orifices to outer cones is normal. convert the appliance to the original gas. Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 46: Composition Of Control

    Front Power PCB(P/N : EBR31737804) Back LED Module(P/N : EAV64012007) Touch film(P/N : MFM64499201) Controller assembly Knob lighting PCB Wifi PCB (P/N : EBR31629601) (P/N : EBR85871801) Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 47 COMPOSITION OF CONTROL Main PCB (P/N : EBR32028302) Backlighting Module (P/N : EAV65008501) Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 48 COMPOSITION OF CONTROL Power PCB (P/N : EBR31737804) LED Module (P/N : EAV64012007) Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 49 COMPOSITION OF CONTROL Touch film (P/N : MFM64236702) Knob lighting PCB Wifi PCB (P/N : EBR31629601) (P/N : EBR85871801) Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 50: Diagnosis Through Schematic

    2. Press the "4" and "6" key at the same time for 1 second. 3. Press the "4" and "6" key at the same time for 1 second again. 4. Select the ‘t0’ by press the 0 button. Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 51 6. Whenever you input the START button, the relay operation sequence should be as seen below. ※ Relay Operation Sequence ※ If want to quit this sequence, turn the mode knob. Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 52 (Normal: approximately 20~40 (approximately 1.06 k at 65F ~ 1.12 k at 85F WIRE COLORS SYMBOL COLOR WHITE BLACK YELLOW PINK BLUE BROWN GREEN GRAY ORANGE VIOLET Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 53: Check The Failure Code (F-Code)

    If the oven does not have any failure, the oven will display like FIG. 2 NO ERROR < FIG. 2 > NOTE: After checking the failure code, turn the mode knob. Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 54: Failure Code Summary

    Lock motor. 2. Motor’s Resistance 3. Micro Switch F-27 Stalled Fan Lock When cooling fan is stalled during self clean 1. Electric Wiring Error 2. Replace cooling fan Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 55: Checking Flow Chart By Failure

    CHECKING FLOW CHART BY FAILURE Symptom Check Point 1. Power Failure 1. Check Electric Wiring (Dead) 2. Check the Main PCB 2. No Display 3. Check the Power PCB 10-1 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 56: No Display (No Power)

    If defective harness, Cord. Normal? replace or fix Reconnect. If defective harness, replace or fix Check the connection of Main PCB (CN10), Power PCB (CN02) Normal? 10-2 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 57 Is it OK? Reconnect. If defective harness, replace or fix. If the same phenomenon occurs even though after fixed connection, you should replace the Main PCB 10-3 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 58: No Heating (Including F9 Error)

    CHECKING FLOW CHART BY FAILURE Symptom Check Point 1. No heating 1. Check Electric Wiring 2. F9 2. Check Heater’s Resistance. 3. Check the Sensor (thermistor). 10-4 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 59 Is the Connector disconnected Replace or fix or loose? (1) Electric wiring of Relay PCB All taps. (2) Electric wiring of electric element Broil Conv. Bake 10-5 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 60 CHECKING FLOW CHART BY FAILURE Replace the failed heater Check the resistance of each igniter. Normal? (Measure the resistance after cooling down.The resistance is shown below) Broil Conv. Heater 10-6 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 61 Main PCB 3. Press the "4" and "6" key at the same time for 1 second again. 4. Select the ‘t3’ by press the 3 button. 10-7 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 62: Door Lock System Failure (Including F10 Error)

    CHECKING FLOW CHART BY FAILURE Symptom Check Point 1. Door Lock System Failure 1. Check the Electric wiring 2. F-10 2. Check the Motor’s Resistance CN06 10-8 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 63 Normal? Reconnect Check the oven door lock switch(micro switch) (measure the resistance → Normally open type) Door latch Door latch open Locked Infinite Continuity 10-9 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 64 3.9 kΩ abnormal: infinite or below 5 Ω Normal? Replace the door locking motor Check the looseness of CN02 CN06 Normal? Reconnect Replace the main PCB 10-10 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 65: Sensing Fail (Including F1, F2 Error)

    Check Point 1. Sensing Fail 1. Check the electric wiring 2. F-1 2. Check the test Mode 3. F-2 3. Check the sensor(thermistor) resistance CN06 CN6 (Pin5) 10-11 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 66 Sensing Fail, F1, F2? Unplug the unit Reconnect or adjust the Is the Connector connection disconnected or loose? (1) Sensor connection (2) CN06 of Main PCB Sensor connection CN06 10-12 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 67 Pin 5 and 6 of CN6 of Main PCB Normal – approximately 1.09 K ohm at 25℃ CN06 Pin 5 and 6 Replace the Main PCB 10-13 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 68: Oven Hot (Including F6 Error)

    CHECKING FLOW CHART BY FAILURE Symptom Check Point 1. Oven hot 1. Check the Resistance of the Relay. 2. F-6 10-14 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 69 Oven too hot error  F-6 error F6(Oven Hot) Unplug the unit Check the DLB Relay damage Replace the Relay PCB (measure the resistance) Normal Abnormal Infinite Continuity 10-15 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 70 Replace the Main PCB thermistor normal? Check : Pin 5 and 6 of CN6 of Main PCB Normal – approximately 1.09 K ohm at 25℃ Replace the Thermistor 10-16 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 71: No Key Input

    (press the Control Lock key for three seconds) Normal? Check the control panel and Find the mechanical malfunction of key Normal? Replace the control panel Replace the main PCB 10-17 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 72: Oven Lamp Does Not Operate

    Check the looseness of oven lamp terminal and harness Normal? Reconnect In case of the defective harness, Check the looseness of connector replace or fix (TAB1 and 9pin of CN04) Reconnect Normal? 10-18 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 73 Oven lamp does not operate Check the oven lamp (measure the resistance) Normal:approximately 20~40Ω, Abnormal : infinite Abnormal Infinite Normal? Replace the oven lamp Replace the Main PCB 10-19 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 74 CHECKING FLOW CHART BY FAILURE Symptom Check Point 1. Convection Fan Error 1. Check the electric wiring. 2. F-7 2. Check the Convection Motor resistance 10-20 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 75: Convection Fan Does Not Operated (Including F7 Error)

    (Refer to 4-1Page “Component Test”) Replace the Main PCB If the same phenomenon occurs even though after Replaced Main PCB, you should replace the Power PCB 10-21 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 76 CHECKING FLOW CHART BY FAILURE Symptom Check Point 1. Sensing Fail 1. Check the probe touches the side panel 2. F-8 2. Check the Main PCB 10-22 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 77: Probe Shorted (Including F8 Error)

    Check the wiring. Is it normal? Replace the Main PCB If defective (Are the white and black wires harness, connected at the proper Replace or locations?) 10-23 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 78: Trouble Shooting

    • The oven gas shut-off valve may • Make sure that the oven gas shut-off valve oven does not have accidentally been moved is fully open. during cleaning or moving. 11-1 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 79 • The plug on range is not • Make sure the electrical plug is inserted into completely inserted in the a live, properly grounded outlet. electrical outlet. 11-2 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 80 • See the page 9-1 in this manual CODE CAUSE displays any F code error. Open oven sensor Shorted oven sensor Oven is too hot No heating F-10 Door locking system don’t operate 11-3 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 81 See “CARE AND CLEANING OF THE RANGE” section in user’s guide. • Drawer is over-loaded or load is • Reduce weight. Redistribute drawer contents. unbalanced. 11-4 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

  • Page 82: Exploded View

    EXPLODED VIEW INTRODUCTION MODEL: Customer Model Product Code SVC Model COOKTOP PARTS CONTROLLER PARTS DOOR PARTS W229 9506 5080 9504 9381 8511 9381 W229 DRAWER PARTS CAVITY PARTS Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 83 #EV# DOOR PARTS 1000 W225 W243 102U 102S 1466 1020 W321 1035 1382 W222 173U 1009 W225 1015 1008 102S 1035 1008 W101 102L 1735 W108 1704 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 84 #EV# CONTROLLER PARTS 2385 2374 2053 2006 3075 2221 260K 2002 245C 245A 2050 261A 244A 245B 244C 2045 244A 2047 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 85 3974 W294 3056 2058 3980 3029 5949 5947 3981 521L 3961 5948 5950 3982 521R 3998 3964 3962 3963 5946 5149 3101 6041 3965 3006 8521 5540 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 86 #EV# DRAWER PARTS 8513 8514 8523 8507 8513 W230 W228 8501 W230 1009 8523 8517 8524 8512 5505 8504 8602 8512 5505 6008 8708 8508 6008 8508 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...
  • Page 87 5462 5545 5021 5090 5509 W232 5516 W124 5802 5981 5465 W230 5533 5536 5512 W115 590L 5510 5149 5942 5931 5556 5951 3014 5019 5066 5032 Copyright © LG Electronics Inc. All rights reserved. Only training and service purposes...

This manual is also suitable for:

Lsgl6337d

Table of Contents