Advertisement

MC-CJ913-Y747
Model No.
MC-CJ913-Y149
MC-CJ913-Y147
MC-CJ913-K747
MC-CJ913-K149
MC-CJ913-K147
Product Color : (Y) Yellow , (K) Black
Destination :
1.Saudi Arabia, Kuwait
MC-CJ913-Y747
MC-CJ913-K747
2.Iran
MC-CJ913-Y149
MC-CJ913-K149
3.UAE
MC-CJ913-Y147
MC-CJ913-K147
© Panasonic Corporation 2012 Unauthorized copy-
ing and distribution is a violation of law.
Order Number VCB1203003CE
Vacuum Cleaner

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic MC-CJ913-Y747

  • Page 1 MC-CJ913-Y149 MC-CJ913-Y147 MC-CJ913-K747 MC-CJ913-K149 MC-CJ913-K147 Product Color : (Y) Yellow , (K) Black Destination : 1.Saudi Arabia, Kuwait MC-CJ913-Y747 MC-CJ913-K747 2.Iran MC-CJ913-Y149 MC-CJ913-K149 3.UAE MC-CJ913-Y147 MC-CJ913-K147 © Panasonic Corporation 2012 Unauthorized copy- ing and distribution is a violation of law.
  • Page 2: Table Of Contents

    TABLE OF CONTENTS PAGE PAGE 1 Specifications ------------------------------------------------------3 2 Location of Controls and Components--------------------4 3 Troubleshooting Guide------------------------------------------5 4 Disassembly and Assembly Instructions -----------------7 4.1. Disassembly of the Dust Cover Assy -----------------7 4.2. Disassembly of the Dust Bag Holder------------------8 4.3. Disassembly of Body Cover Assy, Switch Pedal, Cord Rewind Button------------------------------9 4.4.
  • Page 3: Specifications

    1 Specifications...
  • Page 4: Location Of Controls And Components

    2 Location of Controls and Components...
  • Page 5: Troubleshooting Guide

    3 Troubleshooting Guide CONDITION CHECKPOINT FIGURE CHECK METHOD REMEDY The Motor CORD REEL • Check the continuity at both • If there is no continuity, replace doesn’t rotate. UNIT ends of the Plug and both ends the Cord Reel Unit, or the Rail RAIL BASE of the Lead Wire Terminal of Base Unit.
  • Page 6 CONDITION CHECKPOINT FIGURE CHECK METHOD REMEDY ON/OFF • Check the continuity by press- • If there is a problem, replace SWITCH ing the On/Off Switch. the P.C.B. Assy. (in the P.C.B. Assy) 1. The Motor TRIAC (on the • Check that the Triac has not •...
  • Page 7: Disassembly And Assembly Instructions

    4 Disassembly and Assembly Instructions Important: Always turn the vacuum cleaner is power off before replacing components. Remove the power cord and plug from the mains. * Attention (1) When disassembling the vacuum cleaner, check the connections and wiring (pulling) of each component, and ensure that everything is restored correctly once repairs are complete.
  • Page 8: Disassembly Of The Dust Bag Holder

    4.2. Disassembly of the Dust Bag Holder 1. Remove the Dust Bag Holder by inserting a slotted screwdriver into the mount of the Dust Bag Holder on the Lower Body Unit. Fig.2 Caution (There is a Spring inside) * When replacing the Dust Bag Holder, disassemble and replace the Spring mounted inside.
  • Page 9: Disassembly Of Body Cover Assy, Switch Pedal, Cord Rewind Button

    4.3. Disassembly of Body Cover Assy, Switch Pedal, Cord Rewind Button 1. Remove the Filter Case Fig.4 2. Remove 3 screws and disassemble the Body Cover Assy Fig.5...
  • Page 10: Disassembly Of Upper Body, Handle Cover, And Guide Lever

    3. Disassemble the Switch Pedal/Cord Rewind Button 4.4. Disassembly of Upper Body, toward the direction of the arrow Handle Cover, and Guide Lever Caution: (Spring is placed inside.) *Be careful not to lose the Spring. 1. Disassemble the Body Cover Assy and Switch Pedal as described in (4.3).
  • Page 11 3. Slide the Switch, and push it inward at the position 5. Disassembly of Handle Cover shown in the figure. Disassemble the Handle Cover from the Upper Body. Fig.11 6. Disassembly of Guide Lever Slide and disassemble the Guide Lever to the direc - Fig.9 tion of the arrow.
  • Page 12: Disassembly Of Motor Case Set

    4.5. Disassembly of Motor Case Set 4.6. Disassembly of Cord Reel Unit 1. Disassemble the Rear Cover to the direction of the 1. Release the pretension of the Cord Reel Unit slowly arrow, and disassemble the Motor Case Set pulling by holding on the Power Plug and pressing on the upward.
  • Page 13: Disassembly Of Rail Base Unit

    Disassembly of Rail Base Unit 4.8. Disassembly of Fan Motor Unit 4.7. 1. Remove screw and disassemble the Rail Base Unit from 1. Disassemble the Swivel Cap and remove 3 screws. the Motor Case Set. Fig.18 Fig.16 2. Remove the tabs (4 positions) of the Motor Case Unit 2.
  • Page 14 Fig.20 Fig.21...
  • Page 15: Disassembly Of P.c.b. Assy

    4.9. Disassembly of P.C.B. Assy 1. Disassembly of Volume (a part of P.C.B. Assy) Disassemble the Volume by widening the tab of the Motor Case Unit using a slotted screwdriver. Fig. 2. Disassemble the P.C.B. Holder by pressing on the 3.
  • Page 16: Replacement Of Blower Cover

    4.10. Replacement of Blower Cover 1. Assemble the Spring (for Blower Cover) onto the Blower Cover Fig.25 2. Assemble by inserting the shaft of the Blower Cover into the boss hole. Fig.26...
  • Page 17: Wiring Connection Diagram

    5 Wiring Connection Diagram Fig.27...
  • Page 18: Exploded View And Replacement Parts List

    6 Exploded View and Replacement Parts List 6.1. EXPLODED VIEW (ATTACHMENTS)
  • Page 19: Parts List (Attachments)

    6.2. PARTS LIST (ATTACHMENTS) Safety Ref.No. Service Parts No. Parts Name & Description Q'ty Remarks AMV75PB60V0J HOSE C UNIT (HOSE) AMC24P-0R0V HOSE SUPPORTER AMV92PB80V0J CONNECTION PIPE AMV98PB80V0J CURVED WAND (SUCTION REGULATOR) AMC99P-HP0 EXTENSION WAND UNIT (TELESCOPIC WAND) AMC60RMV060J CREVICE TOOL (CREVICE NOZZLE) AMV88RB6000J DUSTING BRUSH UNIT...
  • Page 20: Exploded View (Body Unit)

    6.3. EXPLODED VIEW (BODY UNIT)
  • Page 21: Parts List (Body Unit)

    6.4. PARTS LIST (BODY UNIT) Safety Ref. No. Service Parts No. Parts Name & Description Q’ty Remarks AMV93KB50K0J DUST COVER ASSY BLACK AMV93KB50Y0J DUST COVER ASSY YELLOW XTN4+20BFJ SCREW AMV0YAB50K0J BODY COVER ASSY BLACK AMV0YAB50Y0J BODY COVER ASSY YELLOW AMV02GB6000J BODY LINING UPPER AMV06BB8020J HANDLE COVER...

Table of Contents