Apm Configuration; Network Stack Configuration - Asus MBD2738 Manual

PCIEX16_2 Mode
This item allows you to set the link speed for second VGA slot.
Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3]
M.2_1 Link Mode
This item allows you to set the link speed for M.2_1 device.
Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3]
M.2_2 Link Mode
This item allows you to set the link speed for M.2_1 device.
Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3]
SB Link Mode
This item allows you to set the link speed for Southbridge.
Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3]
RGB LED lighting
When system is in working state
This item allows you to turn the RGB LED lighting on or off when the system is in the
working state.
Configuration options: [On] [Off]
When system is in sleep, hibernate or soft off states
This item allows you to turn the RGB LED lighting on or off when the system is in the
sleep, hibernate or soft off states.
Configuration options: [On] [Off]
Intel LAN Controller
This item allows you to enable or disable the Intel LAN controllers.
Configuration options: [Disabled] [Enabled]
3.6.7

APM Configuration

The items in this menu allow you to set system wake and sleep settings.
ErP Ready
This item allows you to switch off some power at S4+S5 or S5 to get the system ready for
ErP requirement. When set to [Enabled], all other PME options are switched off.
Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)]
3.6.8

Network Stack Configuration

The items in this menu allow you to configure Ipv4 / Ipv6 PXE support.
ROG STRIX B450-E GAMING
3-17