Connections
opening, then turn the lens slowly to install it.
-. C mount type lens
To allow for flange- back adjustment, install the
C-mount adaptor (option) on the lens mount,
then carefully align the lens mount with the cam-
era opening and turn the lens slowly to install it.
2-1
2-2
.
Connect the lens plug to the lens iris output connec-
tor (LENS) on the side of the camera.
When using lenses from other makers, the plug shape
may not correspond to the terminal on the camera.
16
In such a case, remove the original plug and using a
soldering iron, connect a lens iris plug according to
the diagram. (Refer to next page.)
lens iris output connector
Pin layout for the lens iris output connector.
No.
DC type lenses
1
Damping -
Damping +
Drive +
Drive -
VIDEO type lenses
Vcc (+9V)
Not used
Video
Ground