Page 1
ORDER No. MQM150602 Service Manual LCD Television TX-40CX400 / TX-40CXW404 TX-48CX400 / TX-48CXW404 TX-55CX400 / TX-55CXW404 TX-55CR430 / TX-55CRW434 TX-65CX410 / TX-65CXW414 MB100 Chassis Warning This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potencial dangers in attempting to service a product.
CONTENTS SAFETY PRECAUTIONS ........... 2 GENERAL GUIDE LINES ........2 TOUCH – CURRENT CHECK ....... 2 PREVENTION OF ELECTROSTATIC DISCHARGE (ESD) TO ELECTROSTATICALLY SENSITIVE (ES) DEVICES ..............3 ABOUT LEAD FREE SOLDER (PBF) ......4 SERVICE NAVIGATION ..........5 SERVICE HINTS ............8 SERVICE MODE FUNCTION ........
Safety Precautions General Guide Lines When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed.
Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip"...
About lead free solder (PbF) Note: Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder. The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu). That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.
Spareparts Identification In order to properly identify correct Parts Order No. for each unit, it is required to respect not only the Model number, but also the so called Product Code. Both information can be obtained from rating label on the rear cover of the unit. In the below example the key information would be: Model TX-32CW304 Product Code 10089032 (first 8 digits of upper...
Page 10
How to remove the pedestal and rear cover (65 inch) Remove all marked screws for repair (see Fig.3) Fig.3 Lay the main unit face down and remove all screws, for complete open (see Fig.4) Fig.4...
Service Menu You can see the service menu main screen below. You can check SW releases by using this menu. Some Video settings can be done. How to enter into Service Menu First press [MENU] button on the remote control, then type “4725” and the Service Main Menu will appear. How to exit To return from Service Menu simply press [EXIT] on remote control.
SOFTWARE UPDATE MAIN SW UPDATE In MB97 project please follow the update procedure below: 1. The files mb97_en.bin RomBoot.bin PM51.bin usb_auto_update_D7L.txt should be copied directly into root path of an empty flash memory (not in a folder). 2. Insert flash memory into the TV while TV is disconnected from AC mains. 3.
Hotel Mode HOTEL TV FEATURES The HOTEL TV is a special mode which restricts some operations of TV. This allows the customer to use the TV in hotels,in prisons or in hospitals. The restrictions of a hotel TV are basically given below. 1.
Page 14
Fixed Volume Enable Enables (Fixed Volume Enable = On) or prohibits (Fixed Volume Enable = Off) the use of fixed volume value which is set by menu item “Fixed Volume Value”. If Fixed Volume Enable is ON, volume cannot be set to a value other than the Fixed Volume Value.
Page 15
Multiple RC Support If OFF is selected TV will go on normal operation. If It is ON RCU type (system code) that is chosen in “RCU program menu” will be used. “RCU program menu” can be opened by RETURN-1-2-3-4 shortcut. Note: For any MHEG supporting services sequence should be INFO-RETURN-1-2-3-4.
Parts location Pos. Name Remote Control Main power switch IR-Remote Receiver (K-Board) CI-slot, USB, AV-in, HeadPhone, HDMI Speaker Operation Panel SPDIF, SCART, VGA, ANT.,HDMI1/2, LNB Stand / Foot...
Location of Lead Wiring 40 inch model Back Light LVDS Cable Speaker connection AC-Mains lead Main power switch IR-Remote Receiver...
Page 18
Location of Lead Wiring 48 inch model Back Light LVDS Cable Speaker connection AC-Mains lead IR-Remote Receiver...
Page 19
Location of Lead Wiring 55 inch model Back Light LVDS Cable (41p) LVDS Cable (51p) Speaker connection AC-Mains lead IR-Remote Receiver...
Page 20
Location of Lead Wiring 55 inch model curved Back Light LVDS Cable (41p) LVDS Cable (51p) Speaker connection AC-Mains lead Main power switch IR-Remote Receiver...
Page 21
Location of Lead Wiring 65 inch model Back Light LVDS Cable (41p) LVDS Cable (51p) Speaker connection AC-Mains lead Main power switch IR-Remote Receiver...
Exploded View (40, 48, 55 inch) Pos. Name Rear Cover IR-Remote Receiver (LED-Board) Panel incl.Front Cover Speaker Rear cover Screw Stand Screw Stand / Left Stand / Right Operation Panel...
Page 24
Exploded View (55 inch) curved Pos. Name Rear Cover Front Cover IR-Remote Receiver (LED-Board) Panel Speaker Rear cover Screw Stand Screw Stand Left Stand Right Operation Panel...
Page 25
Exploded View (65 inch) Pos. Name Rear Cover Front Cover IR-Remote Receiver (LED-Board) Panel Speaker Rear cover Screw Stand Screw Stand / Left Stand /Right Metal rear cover Operation Panel...