Fans; Power Supply; Air Shroud; Mounting Rails - Bosch DIVAR IP 7000 Installation Manual

14 en | System overview
For empty chassis, the hard drives must be purchased separately. For the latest shipping lists,
see the datasheet in the online product catalog.
3.2.2

Fans

The system fans provide cooling for the chassis. These fans circulate air through the chassis as
a means of lowering the chassis internal temperature.
The system fans are powered from the motherboard. The fans are 2U high.
3.2.3

Power supply

The chassis has redundant power supplies. Redundant power supplies are hot-swappable, and
can be changed without turning off the system.
Each power supply is auto-switching capable. This enables the power to automatically sense
and operate at a 100 V to 240 V input voltage. An amber light will be illuminated on the power
supply when the power is off. An illuminated green light indicates that the power supply is
operating.
3.2.4

Air shroud

Air shrouds are shields, usually plastic, which conduct the airflow directly to where it is
needed to maximize fan efficiency . Always use the air shroud included with your chassis.
3.2.5

Mounting rails

The unit can be placed in a rack for secure storage and use. To set up your rack, follow the
step-by-step instructions included in this manual.
3.3

System interface

There are several LEDs on the front and rear of the chassis. The LEDs show the over-all status
of the system and the activity and health of specific components.
Front view:
2016.07 | V2 | DOC
1
1 2x USB 2.0 ports
3 Information LED
5 HDD (drive activity)
7 Reset
9 Drive carrier LEDs (green: access to
this drive/red: drive failure)
2 3
2
4
6
8
Installation Manual
4 5 6 7
Power failure
NIC1/NIC2
Power
Power on/off
Bosch Sicherheitssysteme GmbH
DIVAR IP 7000 (2U)
8 9