Table of Contents
Advertisement
Playback NTSC
To use this option you can;
• C o n n e c t a n N T S C V C R p l a y e r t o
Euroconnector at the rear side of the TV.
• Connect an NTSC VCR player to RCA Jacks
at the rear side of the TV.
Then, press the “
” button to select proper
source.
Search For And Store The Test
Signal Of The Video Recorder
• Unplug the aerial cable from the aerial socket
“Aerial” of your video recorder.
• Switch on your TV and put the video recorder
on the test signal. (See the booklet for your
video recorder.)
• Enter the Installation menu in settings
menu. Enter the Programming menu in In-
stallation menu and select manual search.
• Search for the test signal of your video re-
corder in the same way as you searched for
and stored the TV signals. Store the test sig-
nal under programme number 0.
– Replace the aerial cable in the aerial socket
“Aerial” of your video recorder once you
have stored the test signal.
Camera And Camcorder
To Connect To AV-2 Input
Connect your camera or camcorder to AV-2
input at the rear side of the TV.
• Connect your equipment to the TV via VIDEO
(yellow), AUDIO R (red) and AUDIO L (white)
inputs. You must connect the jacks to the in-
put using the same color.
To Connect To S-VHS Input
Connect your camera or camcorder S-VHS
input at the rear side of the TV.
• Connect your equipment to the TV via S-VHS
input and audio inputs of AV-2 inputs by using
S-VHS cables.
All manuals and user guides at all-guides.com
- 23 -
Connect The Decoder To The Video
Recorder
Some video recorders have a special
SCART socket for decoder.
• Connect a SCART lead to the SCART socket
of your decoder and to the special SCART
socket of your video recorder. Refer to the
booklet of your video recorder.
• To connect your video recorder to the TV, re-
fer to the TV and Video Recorder section.
If you want to connect more equipments to
your TV, consult your dealer.
Connecting Headphones
Use the stereo headphone socket at the right
side of the TV (from front view) to connect
headphones.
Tips
Care Of The Screen
Clean the screen with a slightly damp, soft
cloth. Do not use abrasive solvents as they
may damage the TV screen coating layer.
Poor Picture
Have you selected the correct TV system? Is
your TV set or house aerial located too close
to the loudspeakers, non-earthed audio
equipment or neon lights, etc.?
Mountains or high buildings can cause
double pictures or ghost images. Sometimes
you can improve the picture quality by chang-
ing the direction of the aerial.
Is the picture or Teletext unrecognisable?
Check if you have entered the correct fre-
quency.
The picture quality may degrade when two
peripherals are connected to the TV at the
same time. In such a case, disconnect one of
the peripherals.
Advertisement
Table of Contents
