Specifications - Panasonic HTB688 Operating Instructions Manual

Specifications

AMPLIFIER SECTION
RMS output power: Dolby Digital Mode
[HTB688]
Front ch (L, R ch)
60 W per channel (6 ≠), 1 kHz, 10% THD
Centre ch (C ch)
60 W per channel (6 ≠), 1 kHz, 10% THD
Subwoofer ch
120 W per channel (3 ≠), 100 Hz, 10% THD
Total RMS Dolby Digital mode power
[HTB498]
Front ch (L, R ch)
45 W per channel (6 ≠), 1 kHz, 10% THD
Subwoofer ch
90 W per channel (3 ≠), 100 Hz, 10% THD
Total RMS Dolby Digital mode power
[HTB488]
Front ch (L, R ch)
50 W per channel (6 ≠), 1 kHz, 10% THD
Subwoofer ch
100 W per channel (3 ≠), 100 Hz, 10% THD
Total RMS Dolby Digital mode power
TERMINAL SECTION
HDMI output (ARC)
Output connector
Digital audio input
Optical digital input
Sampling frequency
Audio format
LPCM, Dolby Digital, DTS Digital Surround
USB Port
300 W
180 W
200 W
Type A (19 pin)
Optical terminal
32 kHz, 44.1 kHz, 48 kHz
For service use only.
GENERAL
Power consumption
[HTB688]
Main unit
Active subwoofer
[HTB498] [HTB488]
Main unit
Active subwoofer
In standby condition
Main unit
When Bluetooth
When Bluetooth
When all wired network ports are connected
and all wireless networks are activated in
network standby:
[HTB688]
[HTB498] [HTB488]
Active subwoofer
[HTB688]
When wireless activated in network standby
[HTB498] [HTB488]
When wireless activated in network standby
Power supply
Dimensions (WkHkD)
Main unit
For table top layout
1 For wall mounting layout
Active subwoofer
Mass
Main unit
[HTB688]
For table top layout
TM
For wall mounting layout
[HTB498] [HTB488]
For table top layout
For wall mounting layout
Active subwoofer
Operating temperature range
Operating humidity range
20% to 80% RH (no condensation)
standby is off
®
Approx. 0.5 W
standby is on
®
Approx. 2 W
Approx. 6.2 W
Approx. 5.1 W
Approx. 0.5 W
Approx. 3 W
Approx. 2.3 W
AC 220 V to 240 V, 50 Hz
853 mmk60.5 mmk90 mm
853 mmk60.5 mmk111 mm
185 mmk303 mmk337 mm
Approx. 2.3 kg
Approx. 2.4 kg
Approx. 1.9 kg
Approx. 2.0 kg
Approx. 4.8 kg
0 C to i40
o
TQBJ2019
30 W
20 W
19 W
18 W
C
o
27