13. ENVIRONMENTAL CONCERNS..............26 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Page 3
ENGLISH responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. WARNING: Knives and other utensils with sharp • points must be loaded in the basket with their points down or placed in a horizontal position.
Page 5
ENGLISH 2.4 Use cable. Should the mains cable need to be replaced, this must be carried out • Do not put flammable products or by our Authorised Service Centre. items that are wet with flammable • Connect the mains plug to the mains products in, near or on the appliance.
2.6 Disposal separately: These lamps are intended to withstand extreme physical conditions in household appliances, WARNING! such as temperature, vibration, Risk of injury or suffocation. humidity, or are intended to signal • Disconnect the appliance from the information about the operational mains supply.
ENGLISH • When the appliance has a When AirDry is activated malfunction, the red light flashes. during the drying phase, the Beam-on-Floor is off when projection on the floor may the appliance is deactivated. not be completely visible. To see if the cycle is finished, check the control panel.
Indicator Description Machine Care indicator. It is on when the appliance needs internal clean‐ ing with the Machine Care programme. Refer to "Care and cleaning". Drying phase indicator. It is on when you select a programme with the dry‐...
Page 9
ENGLISH 5.4 Programmes overview Programme Dishwasher Degree of soil Programme phases EXTRAS load Quick Crockery, Fresh • Dishwashing 50 °C • ExtraPower cutlery • Intermediate rinse • GlassCare • Final rinse 45 °C • AirDry Crockery, Fresh, lightly • Dishwashing 60 °C •...
Water (l) Energy (kWh) Duration (min) 1) 2) Programme 9.3 - 11.4 0.82 - 0.94 1h 30min 9.1 - 11.1 1.01 - 1.13 2h 40min 9.2 - 11.2 0.96 - 1.08 0.835 AUTO Sense 8.2 - 11.2 0.67 - 1.08...
Page 11
ENGLISH How to change a setting You can change the basic settings in setting mode. Make sure the appliance is in setting When the appliance is in setting mode, mode. the bars of the ECOMETER represent 1. Use Previous or Next to select the available settings.
Page 13
ENGLISH in the same cycle or at the beginning of Acoustic signals sound also the next programme. This activity when a malfunction of the increases the total water consumption of appliance occurs. It is not a programme by additional 4 litres and possible to deactivate these the total energy consumption of a signals.
6.6 Key tones The latest programme that was completed before the appliance The buttons on the control panel make a deactivation is saved. It is then selected click sound when you press them. You automatically after you activate the can deactivate this sound.
ENGLISH 7.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid designed specifically for dishwashers. 1. Press the release button (D) to open the lid (C). 2. Pour the rinse aid in the dispenser (A) until the liquid reaches the fill level 'max'.
Page 16
• The ECOMETER indicates the The appliance senses the type of load level of energy and water and adjusts a suitable wash cycle. consumption. During the cycle, the sensors operate • The display shows the several times and the initial program programme duration.
ENGLISH door, the appliance continues from the • When the programme is completed. point of interruption. • After 5 minutes if a programme was not started. If the door is opened for more than 30 seconds 8.10 End of the programme during the drying phase, the running programme ends.
Page 18
• The arrangement of the items in the results and hard-water filming or baskets is correct. spotting on the items. Using too much • The programme is suitable to the type detergent with soft or softened water of load and the degree of soil.
ENGLISH 10. CARE AND CLEANING • Do not use abrasive products, WARNING! abrasive cleaning pads, sharp tools, Before any maintenance strong chemicals, scourer or solvents. other than running the • Wipe clean the door, including the programme Machine Care, rubber gasket, once a week. deactivate the appliance and •...
Page 20
5. Make sure that there are no residues of food or soil in or around the edge 1. Turn the filter (B) counterclockwise of the sump. and remove it. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides.
ENGLISH 10.6 Cleaning the lower spray 3. To install the spray arm back, press it downwards. We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. 1. To remove the lower spray arm, pull it upwards.
Page 22
Problem and alarm code Possible cause and solution You cannot activate the ap‐ • Make sure that the mains plug is connected to the mains pliance. socket. • Make sure that there is no damaged fuse in the fuse box.
Page 23
ENGLISH Problem and alarm code Possible cause and solution The level of water inside the • Switch the appliance off and on. appliance is too high. • Make sure that the filters are clean. The display shows iF1. • Make sure that the outlet hose is installed at the right height above the floor.
Page 24
The PNC can be found on the rating WARNING! plate on the appliance door. You can We do not recommend using also check the PNC on the control panel. the appliance until the Before checking the PNC, make sure the problem has been appliance is in the programme selection.
Page 25
ENGLISH Problem Possible cause and solution Unusual foam during washing. • Use the detergent designed specifically for dishwash‐ ers. • Use a detergent from a different manufacturer. • Do not pre-rinse dishes under running water. Traces of rust on cutlery. •...