Advertisement
Quick Links
Thank you for your purchasing TG200 terminal.
■ Read this instruction manual and use your KOMTRAX terminal correctly ■
・Operators and service personnel for machines using KOMTRAX should make sure that they read and
fully understand this document.
・Keep this document together with the Operation and Maintenance manual for the machine equipped with
KOMTRAX, and read it repeatedly.
※KOMTRAX is a machine management system that uses wireless communications.
Instruction Manual
KOMTRAX Terminal
Model Name
TG200
TG200
1/11
Advertisement
Related Manuals for Komatsu TG200
Summary of Contents for Komatsu TG200
- Page 1 Instruction Manual TG200 Model Name Thank you for your purchasing TG200 terminal. ■ Read this instruction manual and use your KOMTRAX terminal correctly ■ ・Operators and service personnel for machines using KOMTRAX should make sure that they read and fully understand this document.
- Page 2 Features/Before using What is TG200 TG200 is a communication terminal which is mounted on a vehicle to form a system together with server application software on the base station side and used to control movement of the vehicle and monitor it from a remote place.
-
Page 3: Safety Precautions
■Injuries and damage which can be caused by wrong use of TG200 are explained as shown below. In the column with this mark, an item which "can cause WARNING a death or a serious injury to a person"... - Page 4 Neglecting this may cause a For anyone wearing a pacemaker, trouble, a fire, or an accident. the radio waves may have an Your Komatsu distributor will adverse effect on the operation of carry out removal and the pacemaker. installation.
- Page 5 Prohibit Take the action given in "LONG-TERM Contact your Komatsu distributor before STORAGE" Operation installing a top guard or other attachment Maintenance Manual for the machine, that covers the antenna.
- Page 6 NOTICE: Changes or modifications made to this equipment not expressly approved by Komatsu Ltd may void the FCC authorization to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 7 Request for correct use Storage Do not store TG200 in a place where it will be exposed to direct sunlight, a place where the temperature is extremely low or the humidity is high, a place where there is much corrosive gas.
- Page 8 8/11 Size and Outline TG200 ② ① ① Interface connector (AMP) Connects the power cable and signal lines on the vehicle side. For details, see the specifications of interface connector. ② Antenna connector (BNC) Connects Iridium antenna. TG200...
- Page 9 9/11 Specifications of interface connector Connector on TG200 side: 174684-2 (Manufactured by TE connectivity) Pin Number Name Remark PWR_IN_GW Power supply PWR_CTR_GW Start up signal from another controller GND_PWR_GW DOS_L_RING Start up signal for another controller COMM_ETHER_RX+ Ethernet 100BASE-TX RX+...
-
Page 10: Specifications
10/11 Specifications TG200 Power source DC12V or DC24V (Operating range：DC10V～30V) Current consumption Communication Enabled：500mA Communication Disabled：190mA Standby State：1mA Interface Ethernet 100BASE-TX Digital input start up signal from another controller Digital output start up signal for another controller Communication band and... -
Page 11: Troubles And Causes
TG200 has trouble. Replace TG200. When start up signal line is turned Power source is not Check service power source, GND, and ACC ON, TG200 does not operate. supplied. line. Interface connector pins Correct interface connector pins. are wrong.