• Use only with the cart, stand, tripod, Care in your country. Before you contact bracket or table specified by the Philips, note down the model number and manufacturer or sold with the apparatus. serial number of your product. You can find this When a cart is used, use caution when...
Page 4
CAUTION: To prevent electric shock, match • Where the MAINS plug or an appliance wide blade of plug to wide slot, fully insert.
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Please visit www.recycle.philips.com for additional information on a recycling center in your area. Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products and batteries.
Congratulations on your purchase, and f SURR welcome to Philips! To fully benefit from Lights up when you select Virtual Surround the support that Philips offers, register your sound. SoundBar at www.philips.com/welcome. g Bluetooth Lights up when you switch to the Assemble your Soundbar Bluetooth mode.
Page 7
f SURR Toggle between stereo and virtual surround sound. g BASS +/- / RESET • Increase or decrease bass. • Reset your bass level to the default settings programmed at the factory. h TREBLE +/- / RESET • Increase or decrease treble. • Reset your treble level to the default settings programmed at the factory.
Page 8
Rear connectors a AUDIO IN Connect to an analog audio output on the TV or an analog device. b DIGITAL IN-COAXIAL Connect to a coaxial audio output on the TV or a digital device. c DIGITAL IN-OPTICAL Connect to an optical audio output on the TV or a digital device.
3 Connect Connect audio from TV and other devices This section helps you connect your SoundBar Play audio from TV or other devices through to a TV and other devices. your Soundbar speakers. For information about the basic connections of Use the best quality connection available on your SoundBar and accessories, see the quick your TV, Soundbar, and other devices.
Page 10
• The digital coaxial connector might be labeled DIGITAL AUDIO OUT. Option 3: Connect audio through analog audio cables Basic quality audio Using an analog cable, connect the AUX connectors on your SoundBar to the AUDIO OUT connectors on the TV or other device.
Make the necessary connections described » All Source indicators on the main unit in the quick start guide or download blink twice when treble or bass is set the user manual from www.philips.com/ to the maximum or minimum value. support. •...
SoundBar speakers. Bluetooth device, disable the currently connected What you need Bluetooth device. • Philips does not guarantee 100% compatibility with all • A Bluetooth device which supports Bluetooth devices. Bluetooth profile A2DP, and with Bluetooth version as 2.1 + EDR.
Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury or damage. If you have any query, contact Philips Consumer Care in your country. • Before wall mounting, make sure the wall can support the weight of your SoundBar.
If you still have a problem, get support at www. • The Bluetooth reception is poor. Move the philips.com/support. device closer to the SoundBar, or remove any obstacle between the device and the Main unit SoundBar.
Bluetooth • Connect the equipment into an outlet on SIG, Inc. and any use of such marks by Philips is a circuit different from that to which the under license. receiver is connected.