Husqvarna QHIK650P User Manual page 39

Problem
There is no sound when
you touch the panel sen‐
sor fields.
comes on.
comes on.
and appear alter‐
nately.
and appear alter‐
nately.
and appear alter‐
nately.
You hear a beep sound,
the indicators above
blink and SenseBoil®
does not start.
and a number come
on.
Possible cause
The sounds are deactivated.
Child Safety Device or Lock
operates.
There is no cookware on the
zone.
The cookware is unsuitable.
The diameter of the bottom
of the cookware is too small
for the zone.
The power is too low due to
unsuitable cookware or an
empty pot.
The pot is empty or contains
some liquid other than water,
e.g. oil.
There is too much or too little
water in the pot.
You boiled some food other
than water and potatoes.
The boiling point was moved
in time and SenseBoil®
could not work properly.
None of the cooking zones is
ready to be used with Sense‐
Boil®. There is some residu‐
al heat on the cooking zones
you want to choose or they
are still in use.
There is an error in the hob.
ENGLISH
Remedy
Activate the sounds.
Refer to "Daily use".
Refer to "Daily use".
Put cookware on the zone.
Use suitable cookware. Refer
to "Hints and tips".
Use cookware with correct di‐
mensions. Refer to "Technical
data".
Use the appropriate type of
cookware.
Refer to "Hints and Tips" and
"Technical Data".
Do not activate any zone with
an empty pot on it.
Avoid using the function with
liquids other than water.
Only boil water and potatoes
with the use of SenseBoil®.
Refer to "Hints and Tips".
Finish your previous cooking
activities and choose a free
cooking zone without any re‐
sidual heat.
Deactivate the hob and acti‐
vate it again after 30 seconds.
If comes on again, discon‐
nect the hob from the electrical
supply. After 30 seconds, con‐
nect the hob again. If the prob‐
lem continues, speak to an Au‐
thorised Service Centre.
39