Fujitsu ScanSnap iX1600 Basic Operation Manual page 433

l Feed roller (× 2)/eject roller (× 2)
Press the [Scan] button to rotate the rollers. Gently wipe the dirt and dust off while
taking care not to damage the surface of the roller. Make sure that they are cleaned
properly because residue on the rollers will affect the feeding performance.
HINT
Pressing the [Scan] button seven times will rotate the feed rollers and the eject rollers
one revolution.
3.
Close the ADF top section.
a It clicks when it returns to its original position.
ATTENTION
Make sure that the ADF top section is completely closed.
Otherwise, paper jams or other feeding errors, or image faults may occur.
Eject Roller (x2)
Feed Roller (x2)
ADF Paper Chute (Cover)
ADF Top Section
433
Cleaning iX500