Sharp MD-DS5 Operation Manual page 45

Notes:
The supplied headphones and connection cord
with a 4-pole plug are exclusively for the 1-bit
portable MD player.
If used for other equipment, you may not hear
sounds from both channels.
Use the supplied connection cord to enjoy mu-
sic of the 1-bit portable MD player on other
equipment.
CHARGING THE RECHARGEABLE
BATTERY (pages 12-13)
Charge the rechargeable battery according to the
following procedure.
1. Insert the rechargeable battery.
(1) Open the battery compartment cover.
(2) Insert the – mark of the battery first.
(3) Close the battery compartment cover.
2. Plug the AC adaptor into an AC outlet (AC 100V)
and plug the other end into the DC IN 5V jack on
the battery charger.
3. Place the main unit on the battery charger with
∆Σ facing toward you.
The operation indicator will flash, and the battery
will begin to be charged.
Battery charging will be completed in 3.5 hours.
When battery charging is completed, the opera-
tion indicator will go out.
Use only the attached rechargeable battery (AD-
N55BT).
MINIDISC PLAYBACK (pages 14-18)
1. Plug in the remote control and headphones.
Insert the plug fully.
The commercially available headphones with a 3-
pole plug do not ensure high sound quality.
2. Insert a MiniDisc.
(1) Move the OPEN knob in the direction shown
by the arrow to open the disc holder.
(2) Insert the arrow end of the MiniDisc first,
while pushing the center of the MiniDisc.
(3) Close the disc holder.
When the disc holder is closed, the power is turned on
and the playback is started automatically (Auto play).
If the unit will not be used right after loading the
MiniDisc, turn off the power.
3. Adjust the volume by pressing the
button.
4. Press the BASS button on the remote control
repeatedly to adjust the bass.
BASS1 Slightly emphasized
BASS2 More emphasized
BASS3 Greatly emphasized
BASS0 Not emphasized
To interrupt playback:
Press the button on the remote control during play-
back.
Press the button again to resume playback.
MD-DS5
MD-DS5
or
VOL VOL
45