Hdmi Audio Output - Sanyo FWBP507FF Owner's Manual

4.3.

HDMI audio output

"HDMI" > "HDMI" setting
Media
BD
DVD
Audio CD
DTS-CD
AVCHD
Audio file
*1) If there is secondary audio or interactive audio, it will be output in Dolby Digital.
*2) Only the core substream is decoded.
*3) If there is secondary audio or interactive audio, it will be output in DTS.
Note
D
• If the connected device is not compatible with HDMI BITSTREAM, audio will be output as multi LPCM or
2-channel down-mixed LPCM depending on the capability of the connected device even if you select "Bitstream"
in "HDMI" setting.
• If "HDMI" is set to "Bitstream" and this unit is connected to a bitstream compatible device, only primary audio of
the BD-Video will be output. (Secondary audio and button sounds will not be output.)
• In order to configure "HDMI" settings, the following conditions must be met:
– "Voice Guide" is set to "Off" .
– This unit is not in resume-on-stop mode. If this unit is in resume-on-stop mode, remove the disc to enable
configuration.
EN
A
Source
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS-HD
High Resolution
DTS-HD
Master Audio
LPCM
Dolby Digital
DTS
MPEG
PCM
LPCM
DTS
Dolby Digital
LPCM
FLAC/WAV
Bitstream
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS-HD
High Resolution
DTS-HD
Master Audio
Multi LPCM
Dolby Digital
DTS
Multi LPCM
Multi LPCM
2ch PCM
DTS
Dolby Digital
Multi PCM
2ch PCM
13
PCM Re-encode
2ch PCM Dolby Digital
2ch PCM Dolby Digital Plus
2ch PCM Dolby TrueHD
2ch PCM
2ch PCM DTS-HD
(*2)
High Resolution
2ch PCM DTS-HD
(*2)
Master Audio
Multi LPCM Multi LPCM
2ch PCM Dolby Digital
2ch PCM
Multi LPCM Multi LPCM
Multi LPCM Multi LPCM
2ch PCM 2ch PCM
2ch PCM
2ch PCM Dolby Digital
Multi PCM Multi PCM
2ch PCM 2ch PCM
(*1)
(*1)
DTS
(*3)
(*3)
(*1)
DTS
DTS