Web Menu Settings
This section describes the setting items on each of the Web menu
pages.
Scanner Name Setting
If you click [Scanner Name Setting] on the left menu, the page below
is displayed.
Item
Description
Scanner Name
Sets the scanner name.
Network Setting
If you click [Network Setting] on the left menu, the page below is
displayed.
Item
Description
Enable ([ON]) / disable ([OFF]) the
DHCP protocol.
DHCP
To assign an IP address using
DHCP, the DHCP server must be
running in your subnetwork.
Set the IP address of the scanner.
If DHCP is enabled, the IP address
obtained from it will be applied.
IP Address
The value must be four decimal
numbers separated by dots and
expressed in the [xxx.xxx.xxx.xxx]
format.
99
Default Value
ON
None