System Requirements; Product Setup; Zero Configuration Setup - D-Link PowerLine HD DCS-6045LKT Quick Installation Manual

SySTEm rEQUIrEmENTS

• a router (a d-link cloud Router is recommended)
• a broadband Internet connection
• an e-mail account (required to register for mydlink service)
• computer with:
• microsoft Windows
• pc with 1.3 Ghz or above and at least 128 mB Ram
• Internet explorer 7, Firefox 12, safari 6, or chrome 20 or higher version with java installed
and enabled
• existing 10/100 ethernet-based network

PrODUCT SETUP

Zero Configuration SetuP

If you have a D-Link Cloud Router, you can take advantage of zero configuration setup. this
feature automatically configures your camera's settings for you and adds it to your mydlink account
automatically. If you do not have a d-link cloud Router, you can use the setup Wizard to install and
configure your camera, as described in the following section.
Internet Router
Green
DCS-6045L
DCS-6045L
®
8/7/Vista/Xp, or mac with os X 10.6 or higher
Step 1:
If you already have a powerline adapter on your existing
dhp-308aV
network, continue to step 2. plug in the powerline adapter to
a wall outlet. connect an ethernet cable from the powerline
adapter to your existing network.
Step 2:
plug in the camera power cord into the dcs-6045l. move the
power switch to the on position and wait for the pWR, plc,
and lnk led to turn green. If you have an existing powerline
adapter, you will need to press and hold the plc button on the
camera for 5 seconds. after the plc led on the camera begins
blinking, press the plc button on your existing powerline
adapter within the next 60 seconds.
Step 3:
From any computer, open a web browser, go to
http://www.mydlink.com and log in to your account.
click on the device name when the new device notification
appears to add the camera to your account.
3