Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Huawei EchoLife HG8245Q
Summary of Contents for Huawei EchoLife HG8245Q
- Page 1 EchoLife HG8245Q GPON Terminal Quick Start...
-
Page 2: Safety Precautions
Safety Precautions To use the device properly and safely, read the safety precautions carefully before using the device and strictly observe these precautions when using the device. Safety precautions: Do not look directly into the optical port without eye protection. „... -
Page 3: Technical Specifications
Technical Specifications Item Specifications 230 mm x 190 mm x 30 mm(excluding the Dimensions (L x W x H) support) Weight (including the power adapter) About 500g Power supply See the nameplate on the device. Power adapter input 100-240 V AC, 50-60 Hz Maximum power consumption ≤18.5 W Ambient temperature... -
Page 4: Connecting Cables
Connecting Cables Reset Ethernet port POTS port USB port Power port Optical port IP STB Optical port Power socket TV set USB storage device... - Page 5 WLAN switch WPS switch Wi-Fi terminal Step 1 Use an optical fiber to connect the OPTICAL port on the GPON terminal to the optical port in the wall. NOTE 1.The type of the optical connector connected to the optical port in the wall is determined by practical conditions.
- Page 6 Step 2 Use a network cable to connect the LAN port to a PC or the Ethernet port on the IP STB. Step 3 Use a phone line to connect the TEL port to a phone or fax machine. Step 4 Use a USB data cable to connect the USB port to the USB storage device. Step 5Use a power adapter to connect the POWER port to the power socket.
- Page 7 Configuring Wi-Fi Parameters Step 1 Choose the WLAN tab and choose WLAN Basic Configuration. Step 2 In the pane, select the Enable WLAN option box. In the dialog box that is displayed, set the basic Wi-Fi parameters, including the SSID, authentication mode, and encryption mode.
-
Page 8: Fcc Statement
FCC Statement FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 9: Indicator Description
Indicator Description Table 1 Indicator status description 1 Indicator Status Description The USB port is connected and is working in the host Steady on mode, but no data is transmitted. Blinks twice a Data is being transmitted on the USB port. second The system is not powered on or the USB port is not connected. - Page 10 Table 2 Indicator status description 2 Status Status Description The GPON terminal is prohibited by the upper- layer device, contact the service provider for help. Blinks twice The GPON terminal attempts to set up a a second connection with its upper-layer device. A connection is set up between the GPON Steady on terminal and its upper-layer device.
-
Page 11: Warranty Card
Warranty Card Thank you for choosing Huawei Technologies Co., Ltd. To get better services, please read this warranty card carefully, fill in the required information, and preserve this card in good condition. User Information Personal or company's full name:__________________________________________________ Address/Postal Code:_________________________________________________... -
Page 12: Limited Warranty
In any case that is not covered by this limited warranty or should the warranty expire, Huawei shall charge for the service(s) claimed for the products if the product is still remediable. Huawei reserves all rights to interpret this limited warranty. - Page 13 Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.