Huawei Mini Speaker Quick Start Manual page 5

enables Bluetooth pairing mode. Search for the speaker with the
Bluetooth device that you want to connect to, such as a phone. Touch
the device name of the speaker (HUAWEI CM510) to complete the
pairing.
● Note: On some Bluetooth devices, you may need to enter a
password to set up a connection. The default password is
0000.
● Whenever the speaker is powered on after the first time, you
need to triple-tap the Function button to enable Bluetooth
pairing mode.
2. Pairing two speakers
(Two Bluetooth speakers are required for TWS pairing.)
1. When two speakers are powered on, select either of them as the
main speaker and double-tap its Function button to enable TWS
pairing mode.
(For example, if speaker A is paired with a phone, double-tap the
Function button of speaker A to enable TWS pairing mode.)
2. The other speaker functions as the secondary speaker, which
should be in Bluetooth paring mode. If the secondary speaker is
not in Bluetooth pairing mode, triple-tap its Function button to
enable Bluetooth pairing mode.
3. Then the two speakers will be in the TWS pairing state.
● After the TWS pairing is complete, the main speaker
becomes the left audio channel, and the secondary speaker
becomes the right audio channel. In this state, only the main
speaker can be paired with another device.
● After the TWS pairing is complete, you can operate the
speakers by tapping either of the Function buttons (except in
calling mode). In calling mode, you can only operate the
main speaker.
3. Automatic reconnection upon startup
After the speaker is powered on, it automatically connects to the
previously paired Bluetooth device.
The most recently paired speaker will automatically reconnect
upon startup.
(For example, power on the main speaker and pair it with your
phone, and then power on the secondary speaker. The
secondary speaker will automatically reconnect to the main
speaker to complete the TWS pairing.)
4. Automatic reconnection within the Bluetooth range
In the event that the speaker disconnects from your phone due to
exceeding the Bluetooth connection range:
● If you return to the Bluetooth connection range within 30 minutes,
3
English