Related Manuals for D-Link DWR-980
Summary of Contents for D-Link DWR-980
- Page 1 Quick Installation Guide DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, and 2 FXS Ports...
-
Page 2: Before You Begin
If any of the items are missing, please contact your reseller. The “User Manual” and “Quick Installation Guide” documents are available on D-Link website (see www.dlink.ru). Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product. -
Page 3: Default Settings
Router DWR-980 with default settings cannot connect to the Internet. To get started, please set your own password for access to the web- based interface and change the WLAN name (SSID); then, if needed,... -
Page 4: System Requirements And Equipment
DWR-980 Quick Installation Guide System Requirements and Equipment A computer with any operating system that supports a web browser. • A web browser to access the web-based interface of the router: • ◦ Apple Safari 8 and later ◦ Google Chrome 48 and later ◦... -
Page 5: Pc With Ethernet Adapter
DWR-980 Quick Installation Guide CONNECTING TO PC PC with Ethernet Adapter 1. Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC. 2. To connect via built-in modem: insert a SIM card into the slot on the left side panel of the router with the gold contacts facing towards the front of the device and gently push until it clicks. - Page 6 DWR-980 Quick Installation Guide Obtaining Address Automatically (OS Windows 7) 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category view (the Category value is selected from the View by...
- Page 7 DWR-980 Quick Installation Guide 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button. 7. Click the OK button in the connection properties window.
-
Page 8: Pc With Wi-Fi Adapter
DWR-980 Quick Installation Guide PC with Wi-Fi Adapter 1. To connect via built-in modem: insert a SIM card into the slot on the left side panel of the router with the gold contacts facing towards the front of the device and gently push until it clicks. - Page 9 DWR-980 Quick Installation Guide Obtaining Address Automatically Connecting to Wireless Network (OS Windows 7) 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category view (the Category value is selected from the View by...
- Page 10 DWR-980 Quick Installation Guide 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button. 7. Click the OK button in the connection properties window.
- Page 11 9. In the opened window, in the list of available wireless networks, select the wireless network DWR-980 (for operating in the 2.4GHz band) or DWR-980-5G (for operating in the 5GHz band) and click the Connect button. 10. In the opened window, enter the network key (see WPS PIN on the barcode label on the back panel of the device) in the Security key field and click the OK button.
-
Page 12: Configuring Router
DWR-980 Quick Installation Guide CONFIGURING ROUTER Connecting to Web-based Interface Start a web browser. In the address bar of the web browser, enter the domain name of the router (by default, dlinkrouter.local) with a dot at the end and press the Enter key. Also you can enter the IP address of the device (by default, 192.168.0.1). - Page 13 DWR-980 Quick Installation Guide If you configured the device previously, after access to the web-based interface the login page opens. Enter the username (admin) in the Username field and the password you specified in the Password field, then click the LOGIN...
- Page 14 DWR-980 Quick Installation Guide The Summary page displays general information on the router and its software.
- Page 15 DWR-980 Quick Installation Guide The Home page displays links to the most frequently used pages with device's settings. The web-based interface of the router is bilingual (English/Russian). You can select the needed language upon the initial configuration of the web-based interface of the router or in the System / Configuration section of the menu.
-
Page 16: Initial Configuration Wizard
Click the OK button and wait until the factory default settings are restored. If you perform initial configuration of the router via Wi-Fi connection, please make sure that you are connected to the wireless network of DWR-980 (see the WLAN name (SSID) in the Default Settings section, page 3) and click the NEXT button. - Page 17 DWR-980 Quick Installation Guide 1. Click YES in order to leave the current language of the web-based interface or click NO to select the other language. 2. On the next page, click the CONTINUE button.
-
Page 18: Selecting Operation Mode
DWR-980 Quick Installation Guide Selecting Operation Mode In order to connect your device to a wired ISP, on the Device mode page, from the Connection method list, select the Ethernet (WAN) value. In this mode you can configure a WAN connection, set your own settings for the wireless network in the 2.4GHz and 5GHz bands, configure LAN ports to... - Page 19 DWR-980 Quick Installation Guide In order to connect your device to a VDSL or ADSL line, on the Device mode page, from the Connection method list, select the VDSL or ADSL value correspondingly. In this mode you can configure a WAN connection, set your own settings for the wireless network in the 2.4GHz and 5GHz bands,...
- Page 20 DWR-980 Quick Installation Guide In order to connect your device to a wireless ISP (WISP), on the Device mode page, from the Connection method list, select the Wi-Fi value. In this mode you can connect your device to another access point, configure a WAN connection, set your own settings for the wireless network in the 2.4GHz and 5GHz bands, configure LAN ports to connect an STB or VoIP...
-
Page 21: Creating Lte Wan Connection
DWR-980 Quick Installation Guide Creating LTE WAN Connection This configuration step is available for the 3G/LTE modem mode. 1. If the PIN code check is enabled for the SIM card inserted into the built- in modem, enter the PIN code in the PIN field and click the APPLY button. - Page 22 DWR-980 Quick Installation Guide Wi-Fi Client This configuration step is available for the Wi-Fi mode. 1. On the Wi-Fi Сlient page, click the WIRELESS NETWORKS button and select the network to which you want to connect in the opened window. When you select a network, the Network name (SSID) and BSSID fields are filled in automatically.
-
Page 23: Configuring Lan Port As Wan Port
DWR-980 Quick Installation Guide Configuring LAN Port as WAN Port This configuration step is available for the Ethernet (LAN) mode. 1. On the Device connection page, select a free LAN port which will be used as the WAN port. Click the NEXT button. - Page 24 DWR-980 Quick Installation Guide Configuring Ethernet WAN Connection This configuration step is available for the Ethernet (WAN) and Ethernet (LAN) modes. You should configure your WAN connection in accordance with data provided by your Internet service provider (ISP). Make sure that you have obtained all necessary information prior to configuring your connection.
- Page 25 DWR-980 Quick Installation Guide PPPoE, IPv6 PPPoE, PPPoE Dual Stack, PPPoE + Dynamic IP (PPPoE Dual Access): Enter authorization data provided by your ISP (the username (login) in the Username field and the password in the Password field). Click the Show icon ( ) to display the entered password.
- Page 26 DWR-980 Quick Installation Guide PPTP + Dynamic IP or L2TP + Dynamic IP: Enter authorization data provided by your ISP (the username (login) in the Username field and the password in the Password field). Click the Show icon ( ) to display the entered password.
- Page 27 DWR-980 Quick Installation Guide If your ISP uses MAC address binding, select the Clone MAC address of your device checkbox. If the Internet access is provided via a VLAN channel, select the Use VLAN checkbox and fill in the VLAN ID field.
- Page 28 DWR-980 Quick Installation Guide Configuring VDSL WAN Connection This configuration step is available for the VDSL mode. You should configure your WAN connection in accordance with data provided by your Internet service provider (ISP). Make sure that you have obtained all necessary information prior to configuring your connection.
- Page 29 DWR-980 Quick Installation Guide PPPoE, IPv6 PPPoE, PPPoE Dual Stack: Enter authorization data provided by your ISP (the username (login) in the Username field and the password in the Password field). Click the Show icon ( ) to display the entered password.
- Page 30 DWR-980 Quick Installation Guide Configuring ADSL WAN Connection This configuration step is available for the ADSL mode. You should configure your WAN connection in accordance with data provided by your Internet service provider (ISP). Make sure that you have obtained all necessary information prior to configuring your connection.
- Page 31 DWR-980 Quick Installation Guide PPPoE, IPv6 PPPoE, PPPoE Dual Stack, PPPoA: Enter authorization data provided by your ISP (the username (login) in the Username field and the password in the Password field). Click the Show icon ( ) to display the entered password.
-
Page 32: Configuring Wireless Network
DWR-980 Quick Installation Guide Configuring Wireless Network 1. On the Wireless Network 2.4 GHz page, in the Network name field, specify your own name for the wireless network in the 2.4GHz band or leave the value suggested by the router. - Page 33 DWR-980 Quick Installation Guide 4. If you want to create an additional wireless network isolated from your LAN in the 2.4GHz band, select the Enable guest network checkbox. 5. In the Network name field, specify your own name for the guest wireless network or leave the value suggested by the router.
-
Page 34: Configuring Lan Ports For Iptv/Voip
DWR-980 Quick Installation Guide Configuring LAN Ports for IPTV/VoIP This configuration step is available for the ADSL, VDSL, Ethernet (WAN), Ethernet (LAN), and Wi-Fi modes. 1. On the IPTV page, select the Is an STB connected to the device checkbox. - Page 35 DWR-980 Quick Installation Guide 6. On the VoIP page, select the Is an IP phone connected to the device checkbox. 7. Select a free LAN port for connecting your IP phone. 8. For the VDSL, Ethernet (WAN), Ethernet (LAN), Wi-Fi modes: If the VoIP service is provided via a VLAN channel, select the Use VLAN ID checkbox and fill in the VLAN ID field.
-
Page 36: Changing Web-Based Interface Password
DWR-980 Quick Installation Guide Changing Web-based Interface Password On this page you should change the default administrator password. To do this, enter a new password in the Admin password and Password confirmation fields. You may set any password except admin. Use digits, Latin letters (uppercase and/or lowercase), and other characters available in the US keyboard layout. -
Page 37: Configuring Local Area Network
DWR-980 Quick Installation Guide Configuring Local Area Network Go to the Connections Setup / LAN page. 2. If needed, change the IPv4 address of the router's LAN interface and the mask of the local subnet. To do this, click the IPv4 tab and specify needed values in the IP address and Subnet mask fields in the Local IP Address section. - Page 38 DWR-980 Quick Installation Guide 4. IPv4 address assignment. By default, the built-in DHCP server of the router assigns IPv4 addresses to the devices of the LAN. If you want to manually assign IPv4 addresses, disable the DHCP server (click the...
- Page 39 DWR-980 Quick Installation Guide 5. IPv6 address assignment. By default, the devices of the LAN automatically assign IPv6 addresses to themselves (the Stateless value is selected from the Mode of dynamic IPv6 address assignment drop-down list in the Dynamic IPv6 Addresses section on the IPv6 tab).
- Page 40 DWR-980 Quick Installation Guide Configuring VoIP via SIP 1. Go to the VoIP / Basic Settings page. 2. In the SIP Proxy section, fill in the Address field. 3. If your provider uses a SIP domain, in the SIP Domain section, fill in...
- Page 41 DWR-980 Quick Installation Guide 4. In the Misc section, from the Bound interface name drop-down list, select the interface which will be used by VoIP. 5. If your provider does not require automatic obtainment of the SIP proxy server address, move the Enable DHCP option 120 switch to the left.
- Page 42 DWR-980 Quick Installation Guide 6. In the section corresponding to the port to which the analog phone is connected, move the Registration switch to the right, fill in the SIP ID / Number field, enter the username in the Username field (as a rule, the username and the phone number are the same), and fill in the Password field.
- Page 43 DWR-980 Quick Installation Guide Configuring Network Printer Make sure that a driver for your printer which will be used as a network printer is installed on your PC. To connect the printer to the router, power off both devices. Connect the printer to the USB port of the router, power on the printer, then power on the router.
- Page 44 DWR-980 Quick Installation Guide In the opened window, click the Add a printer button. Select the Add a local printer value and click the Next button. Select the Create a new port choice of the radio button and then select...
- Page 45 DWR-980 Quick Installation Guide Enter the IP address of the router in the Hostname or IP address field (by default, 192.168.0.1). Deselect the Query the printer and automatically select the driver to use checkbox and, if needed, change the name of the port in the Port name field. Click the Next button.
- Page 46 DWR-980 Quick Installation Guide Select your printer and click the Next button. Select the Use the driver that is currently installed choice of the radio button and click the Next button. Enter a name of the printer (you can specify any name) in the Printer...
- Page 47 DWR-980 Quick Installation Guide 15. In the Printer Sharing window, select the Do not share this printer choice of the radio button and click the Next button. 16. If you need to print a test page, click the Print a test page button. To...
-
Page 48: Specifications
DWR-980 Quick Installation Guide SPECIFICATIONS Hardware · Processor RTL8685PB (1GHz) · 128MB, DDR2, built in processor · Flash 128 МБ, Serial NAND · Slot for SIM card (mini-SIM) Interfaces · 10/100/1000BASE-T WAN port · 4 10/100/1000BASE-T LAN ports · 1 RJ-11 DSL port ·... - Page 49 DWR-980 Quick Installation Guide Software · WAN connection types · PPPoE / IPv6 PPPoE / PPPoE Dual Stack / PPPоA · Static IP / Dynamic IP / IPoA · Static IPv6 / Dynamic IPv6 · PPPoE + Static IP (PPPoE Dual Access) ·...
- Page 50 DWR-980 Quick Installation Guide Software · Local and remote access to settings through Management TELNET/WEB (HTTP/HTTPS) · Bilingual web-based interface for configuration and management (Russian/English) · Support of mobile application for Android smartphones · Notification on connection problems and auto redirect to settings ·...
- Page 51 DWR-980 Quick Installation Guide DSL Parameters · VDSL2: ITU G.993.2, support of 8a, 8b, 8c, 8d, 12a, VDSL/ADSL Standards 12b, 17a, 30a, 35b · ADSL: Multi-mode, ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) Annex A, ITU-T G.992.2 (G.lite) Annex A, ITU-T G.994.1 (G.hs)
- Page 52 DWR-980 Quick Installation Guide Wireless Module Parameters · 802.11a Transmitter output power 16dBm at 6Mbps · 802.11b 15dBm at 1Mbps The maximum value of the · 802.11g transmitter output power 15dBm at 6Mbps depends upon radio · 802.11n frequency regulations applied in...
- Page 53 DWR-980 Quick Installation Guide Phone · Direct IP-to-IP сall without SIP proxy (P2P) Call Features · Call hold/retrieve · Call awaiting · Forwarding (unconditional, busy, no answer) · Do Not Disturb · Anonymous call blocking · Speed/abbreviated dialing · PIN code before dialing ·...
- Page 54 DWR-980 Quick Installation Guide Physical Parameters · Dimensions (L x W x H) 220 x 67 x 195 mm (8.7 x 2.6 x 7.7 in) · 465 g (1 lb) Weight Operating Environment · Power Output: 12V DC, 2.5A ·...
-
Page 55: Safety Rules And Conditions
DWR-980 Quick Installation Guide SAFETY RULES AND CONDITIONS Please carefully read this section before installation and connection of the device. Make sure that the power adapter and cables are not damaged. The device should be used only as intended in accordance with the documents. -
Page 56: Technical Support
Quick Installation Guide TECHNICAL SUPPORT You can find software updates and user documentation on our website. D-Link provides its customers with free support within the product's warranty period. Customers can contact the technical support group by phone or by e- mail/Internet.