Download Print this page

Philips AVENT SCH540/00 Manual page 12

Advertisement

Available languages

Available languages

EngliSH
12
Note: If for some reason the temperature cannot be measured, the display
shows 'Lo' or 'Hi'. This means that the temperature is outside the temperature
range. Switch off the thermometer, check if it is correctly positioned and
switch it on again to restart the measurement.
7
Remove the thermometer and read the display.
8
Press the on/off button I to switch off the thermometer.
Note: Switch off thermometer after use to save battery power. If you do not
switch off the thermometer, it switches off automatically: - after 1 minute if
the temperature measured is <32°C; - or after 10 minutes if the
temperature measured is >32°C.
Measuring the temperature of older children
For older children and adults, the digital flexible-tip thermometer can also
be used to measure temperature orally (in the mouth) or axially (in the
armpit).
Do not use the flexible-tip thermometer for oral temperature
measurements on babies.
If the thermometer has been used rectally or in the armpit without
hygienic covers, do not use it for oral measurement anymore for
hygienic reasons, not even after cleaning.
Audible signals
Signal
10 beeps in 10 seconds
3 sets of short beeps in 10
seconds
Meaning
Measured temperature is normal
(below 37.8°C)
Possible fever (measured temperature
above 37.8°C)

Advertisement

loading

This manual is also suitable for:

Avent sch540Avent sch540/01Avent sch540/02