Nokia RM-49 User Manual page 89

In the access point settings, select WLAN security
mode > WEP.
Wired equivalent privacy (WEP) encryption method
encrypts data before it is transmitted. Access to the
network is denied to users who do not have the
required WEP keys. When WEP security mode is in use,
if your device receives a data packet not encrypted with
the WEP keys, the data is discarded.
In an Ad-hoc network, all devices must use the same
WEP key.
Define the following:
• WEP key in use — Select the desired WEP key.
• Authentication type — Select Open or Shared.
• WEP key settings — Edit the settings for the WEP key.
WEP key settings
Select Menu Tools Settings Connection
> > >
Access points. Select Options New access
>
select an access point and Options > Edit.
In the access point settings, select WLAN security
mode > WEP.
In an Ad-hoc network, all devices must use the same
WEP key.
Select WLAN security sett. WEP key settings
>
define the following:
• WEP encryption — Select the desired WEP
encryption key length.
• WEP key format — Select whether you want to enter
the WEP key data in ASCII or Hexadecimal
• WEP key — Enter the WEP key data.
802.1x security settings
Select Menu Tools Settings
> >
Access points. Select Options
select an access point and
In the access point settings, select
mode > 802.1x.
802.1x authenticates and authorizes devices to access
a wireless network, and prevents access if the
authorization process fails.
Select WLAN security sett.. and from the following:
• WPA mode — Select EAP
Protocol) or Pre-shared key
device identification).
• EAP plug-in settings — If you selected
EAP, select which EAP plug-ins defined in your device
to use with the access point.
>
• Pre-shared key — If you selected
point, or
shared key, enter the shared private key that
identifies your device to the wireless LAN to which
you connect.
• TKIP encryption — To enable TKIP encryption, based
on transient keys changed often enough to prevent
misuse, select Allowed.
and All devices in the wireless LAN must either allow or
prevent the use of TKIP encryption.
The settings available for editing may vary.
WPA security settings
Select Menu Tools Settings
> >
format.
Access points. Select Options
select an access point and
Connection
> >
New access point, or
>
Options > Edit.
WLAN security
(Extensible Authentication
(a secret key used for
WPA mode
>
WPA mode Pre-
>
Connection
> >
New access point, or
>
Options > Edit.
89