Playing Dvds; Operations During Play - Fujitsu Lifebook N3510 User Manual

• Adjusting the volume
When the (+) button is pressed, the volume increases, while the (-) button is pressed, it
decreases.
Pressing the [Mute] button temporarily turns off audio. Pressing it again turns audio back on.
The volume adjusting button on the notebook can be used instead of the (+)/(-) button. When
the upper button is pressed, the volume increases, while the lower button is pressed, it
decreases.
Adjust the volume so that the sound from the speaker is not distorted. Failure to do
so could result in damage to the speaker.

Playing DVDs

1. Press the [MyMedia] button to display the main menu.
2. Insert the DVD you want to play into the optical drive of the notebook. Refer to the note-
book user's guide for additional information on using the optical drive and caring for
discs.
3. Select "DVD/CD" from the menu and press the [Enter] button. The DVD will start play-
ing automatically.
When playing a DVD that you were watching earlier, it will start to play from the position
determined by the Auto Resume setting. See "Changing the play settings for DVDs" on
page 30.
When "Start from beginning" is set, the disc will always restart at the beginning. When "Start
from last position" is set, the disc will start playing at the location where it previously stopped.
See "Changing the play settings for DVDs" on page 30
• Each region code is recorded on a DVD, so discs having region codes differ-
ent from the codes set by Instant MyMedia cannot be played. If you want to
play discs having different region codes, change the setting of region codes of
Instant MyMedia. See "Changing the region code" on page 30.
• If you want to play a DVD having a region codes different from the present
one, a message is displayed showing that play is not performed, or a warning
screen appears. If you want to play this DVD, eject the disc and change the
setting of region codes. When a message is displayed, press [Enter] to get rid
of the message, and perform the above operation for changing a region code.

Operations during play

• Pause
When you press the [Play/Pause] button during the play, play is temporarily stopped. When
you press the button again, play resumes.
27