Outline; Using Service Mode; Adjustment Mode (30); Operation/Inspection Mode (40) - Canon NP6412 Service Manual

CHAPTER 11 TROUBLESHOOTING
VII.SERVICE MODE
A.

Outline

The machine's service mode is divided into the following four types:
B.

Using Service Mode

1. Starting Service Mode
1) Open the machine's top unit, and remove the two screws [1]; then, detach the front upper cover
[2].
Caution:
A flexible cable for the control panel is connected to the front upper cover. Disconnect the
cable from the DC controller.
11-88
COPYRIGHT © 1999 CANON INC.
Notation
30 Adjustment mode
40 Operation/inspection mode
50 Machine settings mode
60 Counter mode
Table 11-701
[1]
[2]
[1]
Figure 11-701
CANON NP6512/6612/7120/7130/7130F REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Item