Fujitsu FI-4860C Installation Procedures page 2

Fujitsu SCSI (650) VRS
The flatbed model scanners typically include a lock on the flatbed designed to
protect the scanner during shipment. Before the scanner can be used the
shipping lock must be unlocked. To unlock it do the following:
1. Located the shipping lock slider tab or knob underneath the end of the
scanner.
2. Slide or rotate the lock to the unlock position.
If your model has the old style "L" bracket shipping lock.
3. Slide the scanner to its side as shown in figure below.
4. Unscrew the retainer screw and remove the shipping bracket.
5. Place the shipping bracket in the "use position" slot and secure it with the
retainer screw (see figure below)
6. Place scanner back in its normal position
Rev052206A
Scanner Installation Procedures
Windows ME\2000\XP
Page 2 of 3