Installing The Battery Pack - Canon PowerShot G3 User Manual

Installing the Battery Pack

Install Battery Pack BP-511 (supplied) into the camera as follows. Use the Compact
Power Adapter CA-560 to power the camera for extended periods (p. 21).
1
Turn off the camera (p. 29).
• Check that the power/mode indicator is not lit.
2
3
Battery lock
4
• Charge the battery pack before using it the first time (p. 16).
• When the upper indicator on the left side of the viewfinder is blinking green, the
CF card is being written to, read, erased or transmitted to. Do not turn off the
power, open the battery cover or open the CF card slot cover while the camera's
indicator blinks green.
• Remove the battery pack when the camera is not in use.
Slide the battery cover in the direction
of the arrows.
Press the battery lock while inserting
the battery pack all the way in until the
lock clicks.
• To remove the battery pack, release the battery
lock.
Slide the battery cover closed.
19