Table of Contents
Advertisement
3. OPTIONAL: Downflow Conversion Instructions
Remove !he Screws
Downflow Installation Steps:
1. When the equipment needs to be installed as downflow, first
follow steps 1 ), 2 ) , 3 ) of "Horizontal left installation" (2.3c) to
complete the rotating installation of the evaporator;
2. Remove the grounding wire of the motor, unplug the power cord on the
power supply board, and pull it out from the wire hole of the electrical box;
3. Remove the two screws fixing the fan;
4. Pull the fan out of the guide rail and place it on a flat surface for easy
operation;
5. Take out the sponge in the accessories bag and paste the sponge to the
surface of the fan according to the scheme shown in the right picture;
6. Reinstall the fan back to the device by following the reverse steps
of steps 4, 3, and 2 for the inverted installation, connect the grounding
wire and power cable correctly, and fix the upper and lower panels;
7. Rotate the equipment by 180 degrees to convert the air outlet to
downflow.
Installation and Maintenance
Remove !he Fan
7
New Downflow Position
Advertisement
Table of Contents
