Panasonic PT-60LCX63 Operating Instructions Manual page 16

Installation
Digital Cable Module Connection
This module allows you to tune digital and high defi nition cable channels through the cable antenna.
Consult your Cable company on the availability of this module (also called Point of Deployment (POD)
module).
1
Connect the Cable antenna to ANT A/Cable In input on the back of the unit.
2
Insert the DCM (Digital Cable Module) (upper side facing left) into the DCM INTERFACE (POD INTERFACE)
slot on the back of the unit.
Notes:
• A Digital Cable Subscription is required. (See page 81)
• Do not insert a PC card into the DCM INTERFACE (POD INTERFACE).
• Choose Cable mode for Antenna (A) in Input Setup.
• Follow the instructions on screen.
If you experience keyboard or remote control function hang-up when using DCM (Digital Cable Module), unplug the
unit and plug it back on and try the controls again. If this condition still exists, please call Panasonic Customer Call
Center for further instructions.
16
For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
DCM (Digital Cable Module)
In from cable