Table of Contents
Related Manuals for Siemens WM14UUP9DN
Summary of Contents for Siemens WM14UUP9DN
- Page 1 Washing machine WM14UUP9DN User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety .......... 4 7 Display ........ 20 1.1 General information.... 4 8 Buttons ........ 22 1.2 Intended use....... 4 1.3 Restriction on user group... 4 9 Programmes ....... 23 1.4 Safe installation ...... 5 10 Accessories...... - Page 3 14 Childproof lock...... 30 14.1 Activating the childproof lock ......... 30 14.2 Deactivating the childproof lock ......... 30 15 Basic settings...... 30 16 Cleaning and servicing .... 30 16.1 Cleaning the drum.... 30 16.2 Cleaning the detergent drawer........ 31 16.3 Cleaning the drain pump.. 32 17 Troubleshooting.......
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation Take note of the safety instructions when installing the appliance. WARNING ‒ Risk of electric shock! Improper installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. - Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
-
Page 7: Safe Use
Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. - Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
-
Page 9: Safe Cleaning And Maintenance
Safety en 1.6 Safe cleaning and maintenance Take note of the safety instructions when cleaning and performing maintenance work on the appliance. WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. -
Page 10: Preventing Material Damage
en Preventing material damage Make sure that the length of the ▶ 2 Preventing material thread on the connection to the water tap is at least 10 mm. damage If the water pressure is too high or too low, the appliance may not be Follow these instructions to avoid ma- able to operate properly. -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en Remove all detergent residue, Set the maximum spin speed if you ▶ spray residue or other residues im- want to dry the laundry in the tumble mediately if they come into contact dryer afterwards. with the appliance. a The drier the laundry, the shorter the programme duration when dry- ing which, in turn, reduces energy... -
Page 12: Installation And Connection
en Installation and connection Replace the accessories in ques- ▶ 4 Installation and con- tion before operating the appli- ance. nection → "Accessories", Page 26 Note: The appliance has been tested 4.1 Unpacking the appliance at the factory to check it is in working order. As a result, water stains may ATTENTION! remain in the appliance. - Page 13 Installation and connection en ATTENTION! Installation loca- Requirements If residual water in the appliance tion freezes, this may cause damage to Against a wall Do not trap the the appliance. hoses between Do not install or operate this appli- ▶ the wall and the ance anywhere that is liable to ex- appliance.
-
Page 14: Connecting The Appliance
en Installation and connection Pull the power cable out of the Press down on the 4 cover caps. holder. 4.5 Connecting the appliance Remove the 4 sleeves. Connecting the water inlet hose Connect the water inlet hose. Put on the 4 cover caps. Connect the water inlet hose to a tap (26.4 mm = 3/4"). -
Page 15: Aligning The Appliance
Installation and connection en When connecting to a 21 mm = ½" Sink Fix and secure tap, first fit the adapter with a seal- the water outlet ing washer. hose with an el- → Page 26. Plastic pipe with Fix and secure rubber sleeve or the water outlet gully hose with an el-... -
Page 16: Connecting The Appliance To The Electricity Supply
en Installation and connection To align the appliance, turn the ap- pliance feet. Check that the appli- ance is level using a spirit level. All appliance feet must stand firmly on the ground. Screw the lock nuts tightly against the housing using a WAF 17 wrench. -
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Maintenance flap for the drain pump → Page 32 Door Detergent drawer → Page 18... -
Page 18: Detergent Drawer
en Familiarising yourself with your appliance 5.2 Detergent drawer Measuring aid for liquid deter- gent → "Inserting the measuring aid for liquid detergent", Page 28 Compartment II: ¡ Detergent for main wash ¡ Water softener ¡ Bleach ¡ Stain remover Compartment ¡ Fabric softener ¡... -
Page 19: Starting An Empty Washing Cycle
first time en Pour standard washing powder first time 6 Before using for the into compartment II. first time Prepare the appliance for use. first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory. To remove any residual water, run the first wash cycle without any laundry. -
Page 20: Display
en Display 7 Display The display shows the current settings, options or relevant information. display Designation More information 0:40 Programme dura- Approximate expected programme dura- tion/programme tion or programme time remaining. time remaining "Ready in" time → "Buttons", Page 22 9,0 kg Recommended The maximum load capacity for the selec- load ted programme in kg. - Page 21 Display en display Designation More information End of pro- Programme status gramme Childproof lock ¡ lights up: The childproof lock is activ- ated. ¡ flashes: The childproof lock is activated and the appliance has been operated. → "Deactivating the childproof lock", Page 30 Water Plus and Wash with more water and a rinse cycle is Rinse Plus...
- Page 22 en Buttons 8 Buttons The selection of programme settings depends on the programme that is set. You can see the selection options for each programme in the overview for → "Programmes", Page 23. Button Selection More information ¡ Start Start, cancel or pause the pro- gramme.
- Page 23 Programmes en 9 Programmes Note: The laundry's care labels provide you with additional information about programme selection. Care symbols on the care labels Programme Description Max. load (kg) Bomuld Wash hard-wearing items made from cotton, linen (Cottons) or blended fabrics. Also suitable as a short programme for normally soiled laundry when you activate Programme setting: ¡...
- Page 24 en Programmes Programme Description Max. load (kg) Bomuld + For- Wash hard-wearing items made from cotton, linen vask or blended fabrics. (Cotton+Pre- Programme with prewash for heavily soiled laundry. wash) Divide the detergent between the detergent drawer for the prewash and the main wash. → "Detergent drawer", Page 18 Programme setting: ¡...
- Page 25 Programmes en Programme Description Max. load (kg) Centrifugering/ Spin and drain the water. – Udpumpning If you only want to drain the water, activate - 0 -. (Spin/Drain) The laundry is not spun. Programme setting: Max. 1400 rpm activated...
-
Page 26: Accessories
– Brush sand out of all collars and scanning the QR code in the table of pockets contents or on www.siemens- – Close bed covers and cushion home.bsh-group.com . covers – Close all zips, Velcro fasteners, 11.1 Preparing the laundry... -
Page 27: Detergents And Care
▶ programme. Notes ¡ More detailed instructions for use 13.2 Setting a programme can be found on www.siemens- home.bsh-group.com or by scan- Turn the programme selector and ning the QR code on the title page set the required programme. of this user manual. -
Page 28: Inserting The Measuring Aid For Liquid Detergent
en operation Requirement: The laundry is pre- 13.6 Use the measuring aid pared. for liquid detergent → "Laundry", Page 26 To add liquid detergent, you can use Open the door. a measuring aid in the detergent Make sure that the drum is empty. drawer. Place the laundry in the drum. Pull out the detergent drawer. -
Page 29: Starting The Programme
operation en Pull out the detergent drawer. 13.10 Adding laundry Pour in detergent. Press → "Detergent drawer", Page 18 The appliance pauses. If required, add the care product. Push in the detergent drawer. appears, it is not pos- Note: If sible to add laundry. 13.8 Starting the programme When goes out, it is possible to add laundry. -
Page 30: Switching Off The Appli- Ance
Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on www.siemens- home.bsh-group.com . Leave the appliance door and de- tergent drawer open so that resid- 16 Cleaning and servi-... -
Page 31: Cleaning The Detergent Drawer
Cleaning and servicing en Leave the appliance to dry after Clean the detergent drawer and in- ▶ every operation with the door sert with water and a brush, and open, and leave the detergent then dry them. drawer to dry. Run the Bomuld 90°C programme ▶... -
Page 32: Cleaning The Drain Pump
en Cleaning and servicing Take the drain hose out of the 16.3 Cleaning the drain pump holder. Clean the drain pump in the event of faults, e.g. blockages or rattling noises. Emptying the drain pump Turn off the water tap. Switch off the appliance. Disconnect the appliance's mains plug from the power supply. - Page 33 Cleaning and servicing en Insert the drain hose into the Ensure that the impeller in the holder. drain pump can rotate. Insert the pump cap. Cleaning the drain pump Screw the pump cap as far as it Requirement: The drain pump is will go.
- Page 34 en Cleaning and servicing Before the next wash To prevent unused detergent from flowing straight into the outlet in the next wash, run the Udpumpning pro- gramme after you have emptied the drain pump. Turn on the water tap. Insert the mains plug. Switch on the appliance.
-
Page 35: Troubleshooting
Troubleshooting en 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 36 en Troubleshooting Fault Cause and troubleshooting "E:36 / -10" Ensure that the pump cap is screwed in all the way ▶ into the appliance. The handle on the pump cap must be in a vertical position. → "Cleaning the drain pump", Page 33 "E:36 / -25 / -26"...
- Page 37 Troubleshooting en Fault Cause and troubleshooting All other error codes. Malfunction Call the after-sales service. ▶ → "Customer Service", Page 44 "E:30/-20" Solenoid valve defective. Call the after-sales service. ▶ → "Customer Service", Page 44 Detergent dosage is too high. Reduce the amount of detergent for the next wash- ▶...
- Page 38 en Troubleshooting Fault Cause and troubleshooting The door cannot The temperature is too high. be opened. Wait until the temperature has dropped. ▶ → "Cancelling the programme", Page 29 ▶ Water level is too high. Select a suitable programme for draining. ▶ → "Programmes", Page 23 Power failure.
- Page 39 Troubleshooting en Fault Cause and troubleshooting Water is not flowing You have not pressed in. Detergent is not Press ▶ being dispensed. The filters in the water inflow are blocked. Clean the filters in the water inflow. ▶ The tap is turned off. Turn on the tap.
- Page 40 en Troubleshooting Fault Cause and troubleshooting Vibrations and move- Appliance is not correctly aligned. ment of the appliance Aligning the appliance ▶ whilst spinning. The appliance feet are not fixed. Secure the appliance feet. Aligning the appliance ▶ Transit bolts have not been removed. Removing the transit bolts.
- Page 41 Troubleshooting en Fault Cause and troubleshooting Rushing, hissing Water is flushed under pressure into the detergent noise. drawer. Not a fault – normal operating noise. ▶ Loud noises during Appliance is not correctly aligned. the spin cycle. Aligning the appliance ▶ The appliance feet are not fixed.
- Page 42 en Troubleshooting Fault Cause and troubleshooting The spin result is not The unbalanced load detection system has interrupted satisfactory. The laun- the spin cycle because the laundry is unevenly distrib- dry is too wet/too uted. damp. Redistribute the laundry in the drum. ▶...
-
Page 43: Emergency Release
→ "Before using for the first time", Note: You can find further information Page 19. in the digital instruction manual by scanning the QR code in the table of contents or on www.siemens- home.bsh-group.com . Turn off the water tap. Empty the water inlet hose. -
Page 44: Disposing Of Old Appliance
en Customer Service 18.4 Disposing of old appli- 19 Customer Service ance If you have any queries on use, are Valuable raw materials can be re- unable to rectify faults on the appli- used by recycling. ance yourself or if your appliance needs to be repaired, contact Cus- WARNING tomer Service. - Page 45 Customer Service en Make a note of your appliance's de- tails and the Customer Service tele- phone number to find them again quickly.
- Page 46 en Consumption values 20 Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The values given for programs other than the Eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456. Programme Load Pro-...
-
Page 47: Technical Data
Technical data en Minimum in- 10 A stallation protec- tion Nominal power 2300 W Power consump- ¡ Off mode: tion 0,10 W ¡ Left-on mode: 0,50 W Water pressure ¡ Minimum: 100 kPa (1 bar) ¡ Maximum: 1000 kPa (10 bar) Length of the wa- 150 cm ter inlet hose Length of the wa- 150 cm ter outlet hose... - Page 48 Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001621182* 9001621182 (011125)