Panasonic DMP-BD60K Operating Instructions Manual page 13

G Connecting to 5.1ch AUDIO OUT terminal

Back of the unit
H Connecting to 2ch AUDIO OUT terminal
Television
Back of the unit
AC power connection
Back of the unit



OR
AUDIO IN
R L VIDEO IN
AUDIO IN
Audio/Video cable (included)
2ch AUDIO OUT
Cooling fan
AC power supply cord (included)
To a household AC outlet
(AC 120 V, 60 Hz)
≥"Analog Audio Output" should be set to "2ch
[BD80]
≥Enjoying High Bit rate Audio of BD-Video
Multi channel speakers
≥Using this connection, 7.1 channel surround
≥When connecting amplifier/receiver or other
Connect Audio
cables to
terminals
corresponding to
the speakers you
≥When connecting a TV (
have connected.
≥Depending on how the disc was recorded, the
Cable connections
Amplifier/receiver
a Front speaker (L/R)
b Surround speaker (L/R)
c Center speaker
d Subwoofer
≥"Analog Audio Output" should be set to "2ch
≥Using the two analog audio channels this
Amplifier/receiver
≥For best results this unit should be connected
directly to an AC outlet.
≥This unit consumes a small amount of AC
power ("Quick Start": "Off", less than 0.5 W)
even when turned off. In the interest of power
conservation, if you will not be using this unit
for an extended period of time, it can be
disconnected.
(Downmix) + 5.1ch". ( 34)
( 8)
is mixed down to 5.1 channel audio.
devices with HDMI AV OUT terminal, set
"HDMI Audio Output" to "Off". (
(Otherwise, depending on the specifications
of connected devices, the audio from AUDIO
OUT terminal may be output as two channels
only.)
11, A) with HDMI
AV OUT terminal, set "HDMI Audio Output" to
"Off". ( 34)
(Otherwise, the sound may not be output with
the desired audio.)
audio may not be output properly on the
number of channels desired.
(Downmix) + 5.1ch". ( 34)
connection provides, you will not be able to
use any surround sound audio modes.
34)
13
RQT9378