Wheel Replacement; Brake Adjustment - Yamaha DRIVE 2 DR2 PTV QUIETECH 2021 Owner's/Operator's Manual

MAINTENANCE AND ADJUSTMENT

WHEEL REPLACEMENT

WARNING
Before performing wheel or brake maintenance,
verify that the main switch is in the "OFF" position.
Accidental starting of the vehicle could cause the
vehicle to move, causing death or serious personal
injury.
To remove and install a wheel on your PTV:
1. With the wheels blocked to prevent the PTV from
moving, loosen the wheel nuts.
2. Elevate the PTV with a suitable jack and remove
the wheel nuts and the wheel.
3. Reverse the removal steps when installing the
wheel.
Wheel nut tightening torque:
100 N·m (10 kgf·m, 74 lb·ft)

BRAKE ADJUSTMENT

The brakes on your PTV are self-adjusting.
Before you operate the PTV, press down on the brake
pedal several times to make sure the brakes are func-
tioning properly.
WARNING
Consult your Yamaha dealer before using your PTV
if you suspect brake problems. Brake failure could
result in a serious accident. Death or serious per-
sonal injury can result from failing to comply with
the safety instructions in this manual.
44
1
2
3
4
5
6
7
8
9
10
11
12
13
14