Canceling Receiving; Memory Receiving - Canon Pixma MP530 User Manual

FAX ONLY MODE:
MANUAL MODE:
ANS.MACHINE MODE:
FAX/TEL AUTO SW:
DRPD:
NETWORK SWITCH:
4
Press [OK].
The receive mode will be displayed on the bottom left of the LCD.
02/15/2006 WED 06:11
FAX/TEL
(A)
(A) Receive mode
Note
For details on the receive modes, see

Canceling Receiving

Press [Stop/Reset] and follow any instructions on the LCD.

Memory Receiving

If ink has run out while receiving a fax, if ink level is low, if the <SIZE> setting is incorrect, or if the
<TYPE> setting is other than <PLAIN>, the fax is automatically stored in memory and
<RECEIVED IN MEMORY> is displayed. When the ink tank is replaced or the paper size setting
is corrected, the stored fax is printed automatically.
Note
The machine can store up to approximately 150 pages* of faxes in memory.
If the memory becomes full, the machine cannot receive the remaining faxes. Print or
delete the documents stored in memory (see
on page 77), and then contact the sender and have him/her resend them.
* When using ITU-T No.1 chart (Standard mode)
Chapter 4
See "If You Want to Receive Only Faxes Automatically with Your
Machine, or You Have a Dedicated Telephone Line for Fax Use
Only:" on page 80.
See "If You Receive Mainly Voice Calls and Sometimes Faxes, or
You Want to Receive Faxes Manually:" on page
See "If You Want to Receive Voice Messages on Your Answering
Machine and Receive Faxes Automatically:" on page
See "If You Want to Receive Faxes Automatically as well as Voice
Calls:" on page 81.
See "If You Have Subscribed to a Distinctive Ring Pattern
Detection (DRPD) Service with Your Telephone Company (US and
Canada only):" on page
See "If You Want Your Machine to Automatically Switch between
Fax and Voice Calls by the Call Ring Patterns (Network Switch)
(This setting is not available in some countries and regions.):" on
page 82.
STANDARD
"Receive Modes" on page
82.
80.
"Printing or Deleting a Document in Memory"
80.
81.
83
Faxing