Canon Optura 600 Instruction Manual page 67

REC MODE: Switches the recording mode. The long play mode extends the tape usage
by 1.5 times.
Tapes recorded in LP mode cannot be used for audio dubbing.
Depending on the nature and usage condition of the tape, picture and sound recorded
in LP mode may be distorted. We recommend using the SP mode for important
recordings.
If you record in both SP and LP modes on the same tape, the playback picture may
become distorted and the time code may not be written correctly.
If you play back a tape that has been recorded in LP mode with another digital device
on this camcorder, or vice versa, picture and sound may become distorted.
VIDEO INPUT: When recording from an analog line-in (
signals to digital (
of the analog device connected to the camcorder.
[VIDEO]: When you connect an analog device (VCR, TV or camcorder) via the audio/
video terminal.
[S VIDEO]: When you connect an analog device (VCR, TV or camcorder) via the S-video
terminal.
AUDIO SETUP
Menu Items
OUTPUT CH
AUDIO DUB.
WIND SCREEN
MIC ATT
MIC LEVEL
12bit AUDIO
FIXED,
MIX BALANCE
AUDIO MODE
PHONES VOL.
OUTPUT CH: Switches the output channels when playing back a tape with audio
recorded on two channels.
[L/R]: Stereo: L+R channels, Bilingual: Main+Sub.
[L/L]: Stereo: L channel, Bilingual: Main.
[R/R]: Stereo: R channel, Bilingual: Sub.
AUDIO MODE: Switches the audio recording mode.
[16bit] records in high sound quality.
Select [12bit] if you plan to dub audio later.
PHONES VOL.: Adjusts the headphones volume during recording.
Turn the SET dial up or down to adjust the volume.
102), select the appropriate input signal corresponding to the output
Setting Options
L/R, L/L, R/R
AUDIO IN, MIC. IN
AUTO, OFF
ON, OFF
AUTO, MANUAL
STEREO1, STEREO2,
MIX/VARI.
16bit, 12bit
98) or when converting analog
MIX/
E
-
104
73
72
71
105
105
-
-
67