Hooking Up The Unit; Revolving The Lcd Panel; Selecting The Operation Mode - LG DP482B-P Quick Start Manual

Hooking up the unit

Audio and Video Connections to your TV
Connect the AV OUT jack on the unit to the corresponding input jacks on your
TV as shown below.
Right side of the unit
yellow
Plug into the
"AV OUT" jack.
DP482B-P.AARELLK_ENG_MFL619862107 7 DP482B-P.AARELLK_ENG_MFL619862107 7

Revolving the LCD panel

You can revolve the LCD panel of the unit clockwise a maximum of 180
degrees for use. You can also operate the unit after revolving the LCD panel
180 degrees and folding it back down.
Audio/Video
Cable
To revolve the LCD panel, place the unit on a stable and even surface such
(not supplied)
as on a table. Push the LCD panel up and then lift it into a vertical position.
Revolve the LCD panel clockwise slowly 180 degrees. If you need, fold the
white red
LCD panel after revolving it.
To revolve the LCD panel to its original position, open the LCD panel to a verti-
cal position. Revolve the LCD panel counter clockwise slowly 180 degrees.
• When finished using the unit, return the LCD panel to its original position.
• Do not leave the LCD panel in the face-up position, or sudden shocks may
damage it.

Selecting the operation mode

Audio/Video Adapter
• Select [DISC] to playback the inserted disc.
• Select [USB] to playback the file(s) in the connected USB Flash Drive.
You need to select a operation mode before using
this unit. Press MODE on the unit and the operation
mode selection menu appears. Use b / B to select
a mode then press ENTER.
3/17/09 4:21:22 PM 3/17/09 4:21:22 PM
7