Automatic Icemaker - GE 18 Owner's Manual & Installation Instructions

Automatic Icemaker

A newly installed refrigerator may take 12 to 24 hours to begin making ice.
Automatic Icemaker (on some models)
The icemaker will produce seven cubes per cycle
approximately 100–130 cubes in a 24-hour period,
temperature, number of door openings and other use
conditions.
is made to the icemaker, set the switch in the OFF
position.
When the refrigerator has been connected to the water
supply, set the switch to the ON position.
(–10°C). A newly installed refrigerator may take 12 to 24
hours to begin making ice cubes.
fills with water.
Throw away the first few batches of ice to allow the
water line to clear.
CAUTION
making mechanism while the refrigerator is plugged in.
For Refrigerator Models with Icemaker in the Door
Ice Bucket and Dispenser
• Open the ice box door on inside of the left door.
• Pull up and out on the ice bucket in the left hand door
to remove it from the compartment .
• To replace the ice bucket, set it on the guide brackets
and push until the ice bucket seats properly.
1/4 turn clockwise.
(see Controls on pages 7 and 8.)
For Refrigerator Models with Icemaker in the Freezer Compartment
Some models come with an icemaker installed in the
website at GEAppliances.com or call GE Appliances
Parts and Accessories, 877.959.8688 (in Canada
visit geappliances.ca/en/products/parts-filters-
accessories or call 1.800.661.1616).
on the left side of the upper basket. Pull the upper basket
forward to remove the ice bucket.
20
Green
Power Light
(on some models)
Be sure nothing interferes with the sweep of the feeler
arm.
When the bin fills to the level of the feeler arm, the
cubes to be joined together.
cloudy, taste stale and shrink.
NOTE:
pressure, you may hear the icemaker cycle multiple
times when making one batch of ice.
Visit our
Green
Power Light
(on some models)
Latch
49-1000472 Rev. 1