Step 6; Reprogramming The Remote Control; Inserting Or Removing Media - Panasonic SC-BTT350 Operating Instructions Manual

STEP 6:

Reprogramming the
remote control
When other Panasonic products respond to this
remote control
Change "Remote Control Code" (
the remote control (the two must match) if you place other
Panasonic products close together and it responds to this
remote control.
To change the code on the main unit.
1
While stopped, press [START].
2
Press [3, 4] to select "Other Functions"
and press [OK].
3
Press [3, 4] to select "Setup
[OK].
4
Press [3, 4] to select "Others" and press
[OK].
5
Press [3, 4] to select "Remote Control
Code" and press [OK].
6
Press [3, 4] to select the code (1 or 2) and
press [OK].
To change the code on the remote control.
1
While pressing [OK]
Press and hold the number button
(1 or 2), which has the same number you
selected in the step 6 for more than 5
seconds.
2
Press [OK].
39) on the main unit and
and press
"
Inserting or removing
media
≥ When inserting a media item, ensure that it is facing the right
way up.
≥ While the reading indicator is displayed, do not turn off the
unit or remove the media. Such action may result in loss of
the media's contents.
≥ When removing the SD card, press on the center of the card
and pull it straight out.
∫ To switch sources
Press [BD/SD] to select "BD/DVD" or "SD".
≥ If media is inserted while the unit is stopped, the source
switches automatically depending on the inserted media.
SD CARD
VQT2W18
21