Table of Contents
Advertisement
❖ Information
Even when Wi-Fi is on, packet communication is
･
available. When a Wi-Fi network is disconnected, the
connection is automatically switched to the mobile
network. Note that packet communication charge
may be applied if the network connection is kept
switched.
Turn the Wi-Fi function to off when you do not use
･
Wi-Fi to cut battery power consumption.
For using Wi-Fi, make sure to receive sufficient signal
･
strength.
Connecting to a Wi-Fi network
From the Home screen,
1
u
[Settings]
[Network & internet]
[Wi-Fi].
Select a Wi-Fi network to connect.
2
To connect to a protected Wi-Fi
･
network, enter the password
[CONNECT].
❖ Information
Depending on your usage environment, the
･
connection speed may be decreased, or Wi-Fi may
not be available.
When the terminal is connected to Wi-Fi network
･
successfully, "Connected" appears. If a different
message is displayed, make sure of the password
(security key).
When the connection is not established even if you
enter a correct password (security key), the correct IP
address may not have been acquired. Check the
signal status and reconnect. It may take 5 minutes or
more to display the connection result after the
operation of the connecting to Wi-Fi network.
u
If you connect to an access point that is not
･
u
connected to the Internet,
communication may be performed via mobile
network, not via Wi-Fi. To perform Wi-Fi
communication via such access point, tap the
notification indicating that Internet access is
unavailable appeared when connecting to the
u
access point, and then follow the onscreen
instructions.
To use docomo services via Wi-Fi, you need to set up
･
your d ACCOUNT (P.44).
Deleting connecting Wi-Fi network
setting
From the Home screen,
1
[Settings]
[Wi-Fi].
Tap the Wi-Fi network that is
2
connected.
appears and
u
u
[Network & internet]
Settings
u
147
Advertisement
Table of Contents
