Using The Wink Self-Timer - Canon POWERSHOT 300HS User Manual

Using the Wink Self-Timer

Point the camera at the subject and press the shutter button fully. The camera
will shoot three times approximately two seconds after it detects a wink.
What if a wink is not detected?
• Wink a bit slowly.
• A wink may not be detected if eyes are covered by hair or a hat, or when wearing
glasses.
60
Choose .
∆
Follow Steps 1 – 2 on p. 54 to choose
then press the n button for more than
one second.
∆ Press the qr buttons or turn the – dial to
, then press the n button.
choose
Compose the shot and press the
shutter button halfway.
∆
Confirm that a green frame appears around
the face of the person who will wink.
Press the shutter button fully.
The camera will enter shooting stand-by,
and [Wink to take picture] will appear on
the screen.
The lamp will blink and the self-timer
sound will play.
Face the camera and wink.
The shutter will release approximately 2
seconds after a wink is detected from the
person with a frame around the person's
face.
The second and third shots will continue in
succession.
∆ To cancel the countdown, press the p button.
,