Page 2
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
Page 4
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
instructions for safety and environment This section contains safety Never touch the plug with • instructions that will help to get wet hands! Never unplug by protected from risk of personal pulling on the cable, always injury or property damage. Failure pull out by grabbing the plug.
instructions for safety and environment Children’s safety This appliance is intended • to be used in household and Electrical products are • similar applications such as: dangerous for the children. - Staff kitchen areas in shops, Keep children away from the offices and other working product when it is in use.
instructions for safety and environment Package information 1. Unplug the product before transporting it. Packaging materials of the 2. Remove water drainage and product are manufactured from water supply connections. recyclable materials in accordance with our National Environment 3. Drain the remaining water in Regulations.
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
Installation Refer to the nearest Authorised Service capacity! The product must be installed Agent for installation of your product. To on a flat surface in order for the door to make the product ready for use, make sure be closed comfortably and securely. that the electricity, tap water supply and Do not install the product at places •...
Installation Do not use old or used water inlet hose • on the new product. Use the new water inlet hose supplied with the product. Connect the water inlet hose directly • to the water tap. Pressure coming from the tap should be minimum 0.3 and maximum 10 bars.
Installation Aquasafe+ The voltage and allowed fuse or • breaker protection are specified in the (depends on model) “Technical specifications” section. If the The Aquasafe+ system protects against current value of the fuse or breaker in water leaks that may occur at the hose inlet. the house is less than 16 Amps, have Water contact with the valve box of the a qualified electrician install a 16 Amp...
Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy-efficient Cleaning, rinsing and drying performance of manner. your dishwasher will increase when water Wipe away any coarse food remnants on the softening system is adjusted properly.
Page 15
Preparation Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for the water for about strip from the water you the hardness packet.
Preparation If the hardness level of the supply water Salt reservoir will be filled with is above 90 °dF or if you are using well water when you start the water, then it is recommended to use water product. For this reason, add salt purification devices and special filters.
Preparation Put the detergent into the detergent You need to add salt right before dispenser just before operating the machine starting the machine. Thus, the as illustrated below. overflowing salty water will be Push the latch to right to open the flushed immediately, preventing detergent dispenser lid (A).
Preparation and rinse aid must also be used together 3. Push the lid of the detergent dispenser with the detergent if the water hardness to close it. A "click" will be heard when level is above the mentioned level. the lid is closed. The best washing performance in dishwashers is obtained by using detergent, rinse aid and...
Preparation Rinse aid 4. If there are stains on tableware items after washing, level must be increased The rinse aid used in and if there is a blue trace after wiping dishwashers is a special them by hand, it must be decreased. combination that aims to This is set to position 3 as factory increase drying efficiency and...
Preparation Placing the dishes into the dishwasher You can use your dishwasher in the optimum way with respect to energy consumption and washing and drying performance only if you place the dishes in an orderly way. Wipe away any coarse food remnants •...
Page 21
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware Dishwasher / User’s Manual 19 / 44 EN...
Preparation Cutlery basket Cutlery basket (depends on model) (depends on model) Cutlery basket is designed to wash your Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an dishes such as knife, fork, spoon, etc. in an efficient manner.
Preparation Collapsible lower basket Bringing the tines to the tines horizontal position by holding them from the tips may cause (depends on model) them to bend. Therefore, it will There are foldable tines (A) located at the be appropriate to bring the tines in the middle to horizontal or lower basket of the machine are designed vertical position by holding them...
Preparation SoftTouch Accessory (depends on model) The SoftTouch Accessory found in the lower basket of your machine enables a safe washing for your fragile glasses. Bringing the tines to the horizontal position by holding them from the tips may cause them to bend.
Preparation Lower basket multipurpose Make sure that the impeller does / height adjustable service not touch the dishes you placed rack on the racks. (depends on model) To close the racks: This accessory located at the lower basket Fold the rack (A). of your machine allows you to easily wash 2.
Preparation Lower basket bottle wire (depends on model) The bottle wire is designed for easier washing of long pieces with wide mouths. You may take out the bottle wire from the basket when not in use by pulling it out from both sides (H).
Preparation Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket Hold the upper basket wires with both (depends on model) hands, slightly lift up the basket and The upper basket height adjustment simultaneously push and release the mechanism has been designed for you to latches shown in the figure (B).
Preparation Collapsible upper basket Pull out the basket out completely. Place the basket back into the tracks at the wires desired height (depends on model) Push the latches back into the correct You can use collapsible wires when you need position.
Preparation Ceiling cutlery basket (depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. When the central tray is in the lower position, you can load long/high items such as coffee cups, ladles, etc.
Operating the product Display 5. Function keys 2. On/Off key Half Load function 3. Start/Pause/Cancel key Fast+ Function 4. Time Delay key SteamGloss Function AquaIntense Function 6. Programme Selection keys 7. Programme indicator 12. End of Programme indicator 8. Salt ( ) indicator 13.
Operating the product Keys 3. Press Programme Selection keys until the number of the programme you On / Off key selected appears on the Programme It is used to turn on or off the machine. indicator. Use P+ to switch to the next Press On / Off Key to switch ON.
Page 32
Operating the product /44 EN Dishwasher / User’s Manual...
Operating the product Auxiliary functions AquaIntense Function AquaIntense impeller Washing programmes of your dishwasher located under the are designed to obtain the best cleaning lower impeller helps effect, considering the type of the soil, washing your heavily soiling degree and properties of the dishes soiled dishes places in to be washed.
Operating the product Auto Tablet Feature the desired option with the Time Delay Auto Tablet is a feature which detects key. the use of combined tablet detergents 3. Turn off the machine with On/Off key to automatically. save the changes. Drying performance of these type of detergents is improved Floor illumination...
Page 35
Operating the product 4. Press Start / Pause / Cancel key to of the programme will appear on the Display start countdown for the Time Delay. Information Line. Start / Pause / Cancel Time Delay indicator and Start / Pause indicator starts lighting continuously.
Operating the product Child (Key) Lock necessary operations required to cancel the programme. You may prevent other people from interrupting and changing the programme There might be residues of cycle and time delay while the machine is detergent or rinse aid left in the running.
Operating the product Overflowing warning No rinse aid dispensed in P:0 wash position. 1 dose of rinse aid is dispensed in P:1 If the machine intakes too much water or position. there is leakage at any of the components 2 doses of rinse aid are dispensed in P:2 then the machine will detect this and E:01 position.
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in order cleaned at regular intervals. for the machine operates efficiently. Check if Unplug the product and turn off food residues are left on the filters.
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to Lower impeller remove the upper impeller.
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 42
Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
Page 43
Troubleshooting Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour. It will fade out after a couple of washes. •...
Page 44
Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
Page 45
Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.