Changing Shooting Function Settings
You can set functions in the 4 tab after pressing the
pressing the qr buttons to choose G (p. 45).
Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 122 – 123).
Turning off the AF Assist Beam
●
The lamp will automatically light to assist focusing in low light conditions
when you press the shutter button halfway. You can turn off the lamp.
Turning Off the Red-Eye Reduction Function
●
The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions with the flash. You can turn off this
function.
●
Choose [AF-assist Beam], then press the
qr buttons to choose [Off].
Choose [Flash Settings], then press the m
●
button.
Press the op buttons to choose [Red-Eye
●
Lamp], then press the qr buttons to choose
[Off].
button and
105